Identificador: 141
Abierta
Descripción
PARTE # 2TA-CA-1554 - LIJADORA - CALIBRADORA - 15" ANCHO
- Combination head configuration drum and platen produces a finer finishing result.
- Pneumatic controlled OSCILLATING BELT SYSTEM and easy adjustable pressure for sanding different wood materials such as veneer, hard wood and soft wood.
- Conveyor table roller extension, ideal for big panel sanding such as doors, window frames, etc.
- Specially designed for one side open body sanding up to 30 panels with two passer.
- The emergency stop device ensures instant shot shown of machine running.
- This unit is ideal for the fine finishing requirements of general cabinet parts.
- All rollers and pulley have balancing adjustments ensuring maximum stability.
- High quality conveyor belt gives an outstanding gripping performance.
- Spiral shaped and grooved contact roller is ideal for calibration sanding.
- Infeed and outfeed are spring-loaded to ensure positive roller feeding.
- An electric sensor for excellent operation controls the belt oscillation.
- Designed for efficient small panel sanding at jaw body.
- Heavy-duty construction with precision working parts.
- Air cylinder control tension belt.
- Opcional: Extension rail
SPECIFICATIONS | CA-1554 |
Sanding Width | 15" |
Sanding Belt Size | 15" x 54" |
Conveyer Size | 15" x 64" |
Min. Working Length | 12" |
Max. Working Thickness | 6" |
Feeding Speed | 20 FPM |
Sanding Motor | 7½ HP |
Feeding Motor | ½ HP |
Air Requirement | 6 CFM |
N.W. | 840 LBS |
G.W. | 960 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE
PARTE
# 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored
AMXmachinery
REFILADOR
PARTE # 12C-R1 - REFILADORMOTOR PORTER O MAKITACABLE CON ADITAMIENTO (BROCA, SOPORTE, FRENO Y BOLEO DE ESQUINAS)
AMXmachinery
PARTE: 2TA-DR-06HFKLN – SECANTE DE MADERA – ALTA FRECUENCIA – CAPACIDAD 6 METROS CUBICOS
PARTE: 2TA-DR-06HFKLN – SECANTE DE MADERA – ALTA FRECUENCIA – CAPACIDAD 6 METROS CUBICOSNew with warrantyFeatures:HF vacuum drying equipment is a relatively small and fast timber drying machine, it is used to dry hard wood and thicker timber ,which solves the distortion and crack problems of hardwood and larger section timber, it is very suitable for the solid wood furniture factory, solid wood door factory, solid wood cabinet door factory and timber process factory to dry the timber in la...
AMXmachinery
SISTEMA SPRAY DE PEGAMENTO
PART # 11835 - ULTRASPRAY LAMINATING SYSTEM - MIDWEST AUTOMATION 22 2075En buenas condicionesSistema de spray de pegamento base Agua