Identificador: 224
Abierta
Descripción
PARTE # 2TA-SD-602T - LIJADORA DE MOLDURAS – 2 ARRIBA
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 1 LADO
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 2 LADOS
Nueva con garantia
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring-load pressure rolls at top, without sliding for irregual surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
SPECIFICATIONS |
|
Max. Sanding Width | 6" |
Max. Sanding Height | 4" |
Min. Sanding Length | 13" |
Wheel Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts (universal Heads Only) | 90° ~ 180° |
Max. Sanding Wheel Dia. (Top & Bottom) | 12" |
Max. Sanding Wheel Dia. (Side) | 8" |
Sanding Spindle Dia (top & Bottom) | 1-1/4" |
Sanding Spindle Dia. (Side Head) | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Simple Belt Head |
|
Sanding Belt Size | 6" x 20" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12650 - CEPILLO - 4 CARAS - 24” ANCHO - PINHEIRO
PARTE:
12650 - CEPILLO - 4 CARAS - 24” ANCHO -
PINHEIRO
Usado – Muy buenas condiciones
24" max. planing width
20" max. moulding width
3" min. moulding width
8" max. thickness capacity
16" min. length workpiece unbutted, 9" butt fed
7.5 HP top head
5.5 HP bottom head
side heads are 17.5 HP each
4 HP variable speed feed 20 to 100 FPM
Top and bottom heads are 4-knife straight knife cutter heads
Side heads are 5" dia. X 8" long 4-knife corrugated bac...
AMXmachinery
PARTE: 2MT-CM15 – CORTA Y AGUJERA ESQUINAS – PARA LAMINA RECONOCIMIENTOS
PARTE: 2MT-CM15 – CORTA Y AGUJERA ESQUINAS – PARA LAMINA RECONOCIMIENTOSNueva con garantia6 combinaciones:Esquina NotchEsquina RedondaAgujeros EsquinasAgujeros CentradosCombinacion agujero y notchCombinacion agujero y redonda Peso: 4 kgDimensiones: 17.25 × 11.25 × 6 pulgadasDiámetro agujero: 1/8 y 3/32 El trabajo se hace en 1 solo pasoCortes rapidos, limpios y sin rebabasRadio adjustableRapida y facil de usarPrecision en cortes repetitivos
AMXmachinery
ESPIGADORA SEMIAUTOMATICA DE 2 MESAS CON GRADOS. MOTORES DE 5 HP Y 2 HP
PARTE: 12405-6 - ESPIGADORA
SEMIAUTOMATICA DE 2 MESAS CON GRADOS. MOTORES DE 5 HP Y 2 HP
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
LIJADORA DE TAMBOR 16"
PARTE # SIL-DC-DRUSA - LIJADORA DE 1 TAMBOR - CAPACIDAD DE ANCHO 405 MMMOTOR: 1.5 HP, 110/220V, 60 Hz, 1 FASEDIMENSIONES DE LA LIJA: 132 X 410 MMANCHO MAXIMO DE LIJADO: 405 MMALTO MAXIMO DE LA MADERA: 130 MMPROFUNDIDAD MAXIMA DE LIJADO: 0.30 MMVELOCIDAD: 1720 RPM, ALIMENTADOR: 0 - 3 MTS/SEGDIAMETRO DE LA TOMA DE ASPIRACION: 4"PESO: 96 KGSEMPAQUE: 1 CAJAMEDIDAS: CAJA DE MADERA 92 CM LARGO X 63 CM ANCHO X 123 CM ALTO