Identificador: 2957
Abierta
.PNG)
Descripción
PARTE: 2LA-150 - LIJADORA DE MOLDURAS
This basic machine fills the need for a lower cost profile sander to sand raised panels, door edges and work pieces that do not require a tilting arbor. It features an inverter controlled 3 phase motor, variable speed, and vertical adjustment.
- lower cost profile sander
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 4NE-TCNC - ESPIGADORA CNC - MESA DOBLE - 90 MM X 130 MM
PARTE: 4NE-TCNC - ESPIGADORA CNC - MESA DOBLE - 90 MM X 130 MMTenon Max. Length Horizontal: 130mmTenon Max. Length Vertical: 90mmTenon Debth : 0mm to 50mmTenon Degree : 0 to 90 degreeCapacity : 700 tenons/hMachine Weight: 700kgMachine Dimension ( W*L*H): 1230mm* 1220mm* 1520mmTotal Power: 5kW
-500x500.png)
AMXmachinery1
TALADRADORA 32 mm, 21 CABEZALES
TALADRADORA 32 mm, 21 CABEZALES PARTE: 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precisio...
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX350 - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350 - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM - PREMILLCapable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for effi...
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 14 PULGADAS
PARTE: 2CK-SRS330Is a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the SRS330 can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 13′, which eliminates the need to joint the material after rippingPrecision straight line feeding for parallel...