Identificador: 2372
Abierta
Descripción
PARTE: 12545 - LINEA DE PINTURA UV - SUPERFICI MINI PLUS
USADA - MUY BUIENAS CONDICIONES
Passline Height: 900 mm
Operating side: RH, as viewed from inlet of line, LH available as a special order.
Workpiece Dimensions (Approx.):
Min. - max. length: 300 mm - 4880 mm (12" - 16')
Min. - max. width: 25 mm - 1300 mm (1" - 51”)
Min. - max. thickness: 3 mm - 90 mm (1/8" - 3-1/2")
Max. weight: 3# per sq. ft
Speeds:
Mechanical speed: 1-3 m/min
Avg. production speed: 2 m/min
Connections:
Voltage: 480 V/ 3 Ph + Ground / 60 Hz
Standard distribution system: TN-S
Compressed air: 6 bars
Thermal connection (NOT required for sprayer – if optional dryer is
purchased, the heating coil is electric)With paper protective system for belt
conveyor.
CONVEYING SYSTEM AND PAPER
PROTECTION DEVICE
In-feed and out-feed driven roller conveyor system.
Central belt conveyor with protective paper device.
The paper function is to absorb the overspray, thus protecting the conveyor
belt underneath.
The machine is equipped with a paper roll unwinding system at the in-feed
and rewinding system at the out-feed.
GENERAL DESCRIPTION
The automatic through-feed spraying machine mod. MINI achieves the
advantages of automatic spraying process with a limited investment.
SPRAYING ARM AND LACQUER CIRCUITS
Lacquer application system consisting of a reciprocator with single arm
driven by brushless motor and sliding on a high precision linear guide.
Accurate motion guaranteed by high precision reducer.
The arm is equipped with guns holder supporting up to max four guns, with
two lacquer circuits.
To achieve a higher level of flexibility, the MINI features, as standard, the
QUICK-CHANGE system for the guns holder.
Approx size if unit is
Mini pluis sprayer is 12'
dryer is 25'
infeed table 8'
approx 45 feet long
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
LIJADORA DE BANDA ANCHA – 43” ANCHO – 2 BANDAS
PARTE: 2NT-8-1100RC – LIJADORA DE BANDA ANCHA – 43”
ANCHO – 2 BANDAS
NUEVA CON GARANTIA
• Max Working Width: 1100mm / 43"
• Configuration: Roller-Combination Head
• Number of heads: 2
* 1st Head 8" 65 Shore Rubber Contact Drum
* 2nd Combination Head with 4" rubber contact drum with 65/70
Shore Platen
• Motor: 30HP
• Size of Sanding Belt: 43-3/4" x 75"
• Mechanical Variable Speed 16 - 47.2fpm
• Max Working Height: 150mm / 5.9"
• Feed Moto...
AMXmachinery
SECADOR DE AIRE - PARA AIRE COMPRIMIDO
PARTE: 12342 - SECADOR DE AIRE - PARA AIRE COMPRIMIDO
USADO - BUENAS CONDICIONES
Actualmente esta en servicioSpecifications:460V,
3 Phase. 60 HzLow
Side Circut Design Pressure: 1,9 Mpa, 19 Barg, 276PsigHigh
Side Circut Design Pressure: 2,8 Mps, 28 Barg, 406 PsigMaximum
Air Input: 60 Degrees C (Low), 140 Degrees (High)Minimum
Ambient Temperature: 5 Degrees C (Low), 41 Degrees F (High)Maximum
Ambient Temperature: 50 Degrees C (Low), 122 Degrees F (high)Minimum
Circuit Ampacity: 5.0 AM...
AMXmachinery
ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
PARTE:
2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
Nueva con garantía
2GM-HBR-05375-4R – ROLADORA
DE 4 RODILLOS - 5’ x 3/8”, 7.5 HP, 220/440V, 3PH
2GM-HBR-06375-4R – ROLADORA
DE 4 RODILLOS - 6’ x 3/8” , 7.5 HP, 220/440V, 3PH
2GM-HBR-08375-4R – ROLADORA
DE 4 RODILLOS - 8’x 3/8” , 10 HP, 220/440V, 3PH
2GM-HBR-10375-4R – ROLADORA
DE 4 RODILLOS - 10’x 3/8” , 10 HP, 220/440V, 3PH
-500x500.jpg)
AMXmachinery
LIJADORA - CALIBRADORA - 43" ANCHO - 2 LIJA
PARTE: 2LB-WS-DA4375 - LIJADORA - CALIBRADORA - 43" ANCHO - 2 LIJACabezales: 2 cabezasCapacidad: 43" ancho x 75" largoWith the two head wide belt sander, you can accurate heavy sanding your stock with the first drum head and with the second combinational head you can give the unlimited fine finish.Rugged heavy-duty sheet metal construction designed for durability usage.Full power industrial motors drive sanding and auto infeed smoothly.Infeed and outfeed are spring loaded hold down rollers to en...