Información del vendedor
AMXmachinery
- Registrado Desde:
- 03.03.2020 23:18:57
- Envienos sus comentarios
- n/a
- Ver otras Articulos
Descripción
PARTE: 12545 - LINEA DE PINTURA UV - SUPERFICI MINI PLUS
USADA - MUY BUIENAS CONDICIONES
Passline Height: 900 mm
Operating side: RH, as viewed from inlet of line, LH available as a special order.
Workpiece Dimensions (Approx.):
Min. - max. length: 300 mm - 4880 mm (12" - 16')
Min. - max. width: 25 mm - 1300 mm (1" - 51”)
Min. - max. thickness: 3 mm - 90 mm (1/8" - 3-1/2")
Max. weight: 3# per sq. ft
Speeds:
Mechanical speed: 1-3 m/min
Avg. production speed: 2 m/min
Connections:
Voltage: 480 V/ 3 Ph + Ground / 60 Hz
Standard distribution system: TN-S
Compressed air: 6 bars
Thermal connection (NOT required for sprayer – if optional dryer is
purchased, the heating coil is electric)With paper protective system for belt
conveyor.
CONVEYING SYSTEM AND PAPER
PROTECTION DEVICE
In-feed and out-feed driven roller conveyor system.
Central belt conveyor with protective paper device.
The paper function is to absorb the overspray, thus protecting the conveyor
belt underneath.
The machine is equipped with a paper roll unwinding system at the in-feed
and rewinding system at the out-feed.
GENERAL DESCRIPTION
The automatic through-feed spraying machine mod. MINI achieves the
advantages of automatic spraying process with a limited investment.
SPRAYING ARM AND LACQUER CIRCUITS
Lacquer application system consisting of a reciprocator with single arm
driven by brushless motor and sliding on a high precision linear guide.
Accurate motion guaranteed by high precision reducer.
The arm is equipped with guns holder supporting up to max four guns, with
two lacquer circuits.
To achieve a higher level of flexibility, the MINI features, as standard, the
QUICK-CHANGE system for the guns holder.
Approx size if unit is
Mini pluis sprayer is 12'
dryer is 25'
infeed table 8'
approx 45 feet long
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit, Bank Transfer/Direct Debit, Transferencia y Deposito Bancario
Publicar mensaje
PARTE: 1AM-3016 - SIERRA TRONZADORA - DISCO 16” - MOTOR 7.5 HP - AMX
PARTE: 1AM-3016 - SIERRA TRONZADORA - DISCO 16” - MOTOR 7.5 HP - AMX USADA - BUENAS CONDICIONES CAPACIDAD DE CORTE: ESPESOR MAXIMO: 2-1/4” ANCHO MAXIM...
AMXmachinery
SIERRA CINTA 10"
PARTE # SIL-DC-SC10-B - SIERRA CINTA DE 10" - MOTOR 1/2 HP NUEVA CON GARANTIAMOTOR: 1/2 HP, 110V, 60 Hz, 1 FASEDISTANCIA DE CINTA A COLUMNA: 230 MMALTURA MAXIMA DE...
AMXmachinery
PARTE: 12322 - PUNZONADORA - 30 TONS
PARTE: 12322 - PUNZONADORA - 30 TONS USADA - BUENAS CONDICIONES Tonnage capacity: 30 tons Maximum material thickness: ...
AMXmachinery
PARTE: 12452 - TALADRO MULTIPLE - RITTER
PARTE: 12452 - TALADRO MULTIPLE - RITTER USADA - BUENAS CONDICIONES
AMXmachinery