Identificador: 1940
Abierta
Descripción
PARTE: 12382 - OPTI-CONTROL - WEINIG - OCMS
USADA - BUENAS CONDICIONES
Electronic Measuring and Indicating System
Maximum Measuring Width: 13"
Maximum Tool Diameter: 11-3/4"
Electronic measuring via electronic digital readouts for radial and axial measurements
Wired 110V Single Phase
Year: 2003
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVEN
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVENUsada - Muy buenas condicionesFeatures and Specifications:Saw capacity of 6" width x 8" vertical capacity. Minimum working 2” high X 12” long. Main drive motor to saw frame is 30HP 3PH, wired 460 VServo drive system to feed works is 1/4HP 3PHBlower to saw frame rack for added cleaning value is 3HP 3PHBody of frame saw is (2) sections allowing for fast access to the saw frameSaw blade speed is fixed at 550RPMDust extraction requires min 3000 CFM and...
AMXmachinery
MESA DE TIJERA
PARTE: 12046 – MESA DE TIJERA – MESA 32” X 60” – CAPACIDAD 4000 LBUsada en buenas condicionesMotor 3/4 HP, 220/440V, 3 PHAltura máxima 44"
-500x500.jpg)
AMXmachinery
CEPILLO 2 CARAS 16", 24"
PARTE # 3GO-GT-400B - CEPILLO 2 CARAS – CAPACIDAD 16" ANCHO – MOTOR 10, 7.5, 2, ½ 10 HPPARTE # 3GO-GT-610B - CEPILLO 2 CARAS – CAPACIDAD 24” ANCHO – MOTOR 15, 10, 2, ½ HPPARTE # 3GO-GT-610A - CEPILLO 2 CARAS – CAPACIDAD 24" ANCHO – MOTOR 20, 15, 3, ½ HPESPECIFICACIONESPARTE # 3GO-GT-400B - CEPILLO 2 CARAS – CAPACIDAD 16" ANCHO – MOTOR 10, 7.5, 2, ½ 10 HPMotor: 10hp,7.5hp,2hp,1/2hpMaximum width of cut: 405MM Minimum thickness of cut...
AMXmachinery
PARTE: 12448 - MESA DE TIJERA - HIDRAULICA - 1.22 x 1.22 METROS - 5000 LBS
PARTE: 12448 - MESA DE TIJERA - HIDRAULICA -
1.22
x 1.22 METROS - 5000 LBS
USADA - BUENAS CONDICIONES