Identificador: 2399
Abierta
PART: 1AM-1280-E – PALLET NOTCHER - 9” LENGTH – 40 KNIVE CUTTERHEAD - HEAVY DUTY
AMXmachinery
Descripción
PART: 1AM-1280-E – PALLET NOTCHER - 9” LENGTH – 40 KNIVE CUTTERHEAD - HEAVY DUTY
New with warranty – 6-month warranty on manufacturing defects on mechanical parts only
Motor 10 HP, 220/440V, 3 phase - connected to 220V
Maximum notcher size 9” length x 3” height x 3” depth
Cutterhead with 40 insert replaceable tip knives cutters for recycled wood installed
On/Off Switch with magnetic starter
Products specifications are subject to change without notice
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
PARTE: 2QW-F15 - LIJADORA - AIRE COMPRIMIDO - CABEZA OPCIONAL 8”
PARTE: 2QW-F15
- LIJADORA - AIRE COMPRIMIDO - CABEZA OPCIONAL 8”Handy two-handed tool that is suitable for both wood sanding and finishing of impregnating and paints, as well as for polishing and cleaning, and is particularly suitable for manual machining of large surfaces such as furniture Assembled and stacked boards.This product is hand tool only please remember to get the right grit 8" flap wheels for your job.
AMXmachinery
ENCHAPADORA CURVOS
PARTE # 12C-EB-1 - ENCHAPADORA CANTOS CURVOSPOTENCIA MAXIMA: 3500 WATTSVOLTAJE: 220 VOLTSVELOCIDAD DE TRABAJO: 4 METROS X MINUTOTEMPERATURA DE OPERACIÓN: 150-230 ºCALIMENTADOR: RODILLO DE HULEPROTECCIÓN: BAQUELITAMESA: PLACA 3/16ADHESIVO: HOT MEALPESO APROXIMADO: 180KGPARO DE EMERGENCIA2 ZONAS DE CONTROL DE TEMPERATURAPIRÓMETROS ANALOGOBASTIDOR: PLACA CA 10TRANSMICION: ENGRANESTERMOSTATOCONTROL DE ARRANQUETERNOPAR: TIPO J
AMXmachinery
PARTE: 12474 - PINCH ROLLER - EVANS
PARTE: 12474 - PINCH
ROLLER - EVANS
USADA - BUENAS CONDICIONES
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Thickness adjustable by spacers
Work Height: 30-1/2”
Drive Motor: 1/2 HP
Electrical: 120 V, 1 PH,
60 Hz
Air Requirement: 100 PSI
AMXmachinery
PEGADORA CANTO CHAPA - ESPESOR 0.5 - 5.0 MM
PARTE # 3NN-VENEERPLUSG2 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPASistema de pegamento integrado Machine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.5 ~ 5.0 mmVeneer Strip Length：min. 350 mmVeneer Strip Width：min. 45 mmProduction Speed：approx. 8 ~ 45 m/min. (depending on veneer strip thickness)Electric Power：approx. 10.8 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：1500 mmDimensions (L x W x H)：2550 x 2100 x 1600 mmNe...