Identificador: 2075
Abierta
Descripción
PARTE: 12438 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S90
USADA – MUY BUENAS CONDICIONES
- Incoming Lengths up to 248" (20')
- Widths 3/4" Min to 14-1/4" Max
- Thickness 3/8" Min to 4" Max
- Automatic Length Cutting: 800 Lengths Distributed onto 16 Cutting Lists can be Stored. Input up to 200 Lengths per Cutting List is Possible
- Saw Motor 10HP
- Saw Blade Diameter 20-1/2"
- Swiveling Positioning Pusher Including Laser Photo-eye for Automatic Length Detection
- Lateral Pressure Unit for More Dynamic Positioning and Rectangular Cut
- Advance Speed up to 393' /min.
- Speed at Return Stroke up to 787'/min.
- Accuracy Package for Positioning of Pusher +/- 0.1mm
- Automatic Start After Workpieces have been Inserted
- Wide Infeed Table
- Integrated Waste Gate Electro-pneumatically Actuated
- Max. Waste Length Approx 4-3/4"
- Outfeed Conveyor Belt / Sorting Station with Drive Unit 25'
- Two (2) Pneumatic Kickers
- nd of belt can also be used in an additional sort for long fixed length parts, finger joint blocks, or long waste
- New in 2007
- 480v, 3ph
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP
PARTE: 12385 -
SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP
USADA - BUENAS
CONDICIONES54" Dia. Wheels with 6-1/2" Face7" x 29'0" blade SizeAir Tensioning with Dial Adj. for Top WheelSelf Centering Feed Works that can also be preset to a sizesix 7" Dia. x 12" High Smooth Feed Rolls (Three
Each Side of Saw Line) all with Individual Adjustment for Aligning with Saw
Blade21" Max. Feed Roll Opening( 12" Outside Sawline,
9" Inside SawlineSteel Weldment Roll Cradle with Chrome Plate...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 299 LITROS
PARTE:
2PG-TNF283 – HORNO PARA CERAMICA, VIDRIO, METALES – 299 LITROSNuevo con garantiaThe massive, 12-sided digital TnF-28-3 is a profit center of the busy ceramic studio. It eats up stacks of low-fire ware. At a cost per cubic foot, the TnF-28-3 is one of the most economically priced standard kilns we make.The TnF-28-3 now features sectional construction. Separate the kiln bottom and sections to repair bricks, change elements, or to move the kiln down narrow stairwells or through the narr...
AMXmachinery
PERFILADORA AFILADORA DE CUCHILLAS WEINIG
PARTE # 12WG-R-960 - PERFILADORA / AFILADORA DE CUCHILLASPerfiladora/afiladora de cuchillas de alta precisión para:El afilado y la fabricación de cuchillas perfiladas a partir de una cuchilla en bruto, de acuerdo con una plantilla.El reafilado de cuchillas rectas de cepillado en el cabezal portacuchillas.El afilado de cuchillas rectas de cepillado en el cabezal porta-cuchillas es posible, sobresaliendo las mismas en su medida normal.Diámetro de la muela mín./máx. 150 mm / 225 mmAncho de la ...
AMXmachinery
PARTE: 12658 - SKIDDER - CATERPILAR
PARTE: 12658 - SKIDDER - CATERPILAR
USADO
Aditamento a escoger cotizado aparte
Para grúa, gripple, etc.,