Identificador: 2075
Abierta
Descripción
PARTE: 12438 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S90
USADA – MUY BUENAS CONDICIONES
- Incoming Lengths up to 248" (20')
- Widths 3/4" Min to 14-1/4" Max
- Thickness 3/8" Min to 4" Max
- Automatic Length Cutting: 800 Lengths Distributed onto 16 Cutting Lists can be Stored. Input up to 200 Lengths per Cutting List is Possible
- Saw Motor 10HP
- Saw Blade Diameter 20-1/2"
- Swiveling Positioning Pusher Including Laser Photo-eye for Automatic Length Detection
- Lateral Pressure Unit for More Dynamic Positioning and Rectangular Cut
- Advance Speed up to 393' /min.
- Speed at Return Stroke up to 787'/min.
- Accuracy Package for Positioning of Pusher +/- 0.1mm
- Automatic Start After Workpieces have been Inserted
- Wide Infeed Table
- Integrated Waste Gate Electro-pneumatically Actuated
- Max. Waste Length Approx 4-3/4"
- Outfeed Conveyor Belt / Sorting Station with Drive Unit 25'
- Two (2) Pneumatic Kickers
- nd of belt can also be used in an additional sort for long fixed length parts, finger joint blocks, or long waste
- New in 2007
- 480v, 3ph
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CORTADORAS DE PERNOS - ¼” - ¾” - PARA HACER TAQUETES RAYADOS - ALTA VELOCIDAD
PARTE:
2TA-DC78 - CORTADORAS DE PERNOS - ¼” - ¾” -
PARA HACER TAQUETES RAYADOSNUEVA CON GARANTIAFeatures:High
production, high speed.Can
auto sift out dowel which length is insufficient.Each
spiral fluting, straight fluting, smooth and dowels with dowel cross-cut and
chamfering from DC-7500.Capacity:
about 7,500-15,000 dowels/hour with infinitely variable speed change.Cutting
length range: 30-150 mm.Accuracy
turbine and turbine shaft perform feeding transfer, lubrication for trans...
-500x500.jpg)
AMXmachinery
LINEA DE CARDADO OPEN END SECCIÓN HILO GRUESO OPEN
PARTE: 12148 – LINEA DE CARDADO OPEN ENDSECCIÓN HILO GRUESO OPEN
AMXmachinery
CLAVADORA PARA TARIMAS
PARTE # SIL-DC-AT3092 - CLAVADORA NEUMATICA PARA TARIMASNUEVA CON GARANTIALONGITUD DE CLAVO: DESDE 1-3/4" HASTA 2-3/4"90-110 PSI, 6-8 CFM, 168-220 LTS/MIN
AMXmachinery
PARTE: 12550 - TRITURADORA - ORILLAS CHAPA, PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5SC
PARTE: 12550 - TRITURADORA - ORILLAS CHAPA, PAPEL,
CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5SCPara papel, cartón corrugado y fibras pesadasUSADA - MUY BUENAS CONDICIONES
Motor Baldor 2HP, 3/60/205-230/460V