ID: 2484
Open
.jpg)
.jpg)
.jpg)
.jpg)
Description
PARTE: 12575 - SEPARADOR MAGNETICO DE BANDA
SIN USAR, EXCELENTES CONDICIONES
Unused, “New” Conditions
Motor: 3 HP, 230/460V/3/60
Marca: Wolverine
29-1/2” wide x 70” long Belt
Motor: WEG 3HP
Approximate Weight/unit (kgs): 776
Aproximate Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed - It is fixed speed and can be changed with a controller.
Magnet power is strong - the original design was to pull small scrap metal from sand on conveyor belt.
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTA
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
PARTE: 1SL-DC-BV25B - TORNO PARA METAL DE 240 X 400 MM
PARTE: 1SL-DC-BV25B - TORNO PARA METAL DE 240 X 400 MMNUEVO CON GARANTIAMOTOR 1 HP, 220V, 60 Hz, 2 FASESCAPACIDAD DE VOLTEO: 240 MMDISTANCIA ENTRE PUNTOS: 400 MMDIAMETRO DEL CHUCK: 125 MMVELOCIDADES: 6 VELS (115-1620 RPM)DIAMETRO HUSILLO: 25 MMPESO: 135 KGSTIPO DE EMPAQUE: 1 CAJA ACCESORIOS PARA EL TORNO - SE VENDEN POR SEPARADO:- CHUCK DE 4 MORDAZAS - DC-4JC- CONTRAPUNTO GIRATIRIO (CONO MT2) - DC-RC- LUNETA FIJA - DC-SR- LUNERA VIAJERA - DC-FR
AMXmachinery
PARTE: 12444 - MOLDURADORA - 5 CABEZALES - WEINIG U23E
PARTE: 12444 - MOLDURADORA -
5 CABEZALES - WEINIG U23E
USADA - BUENAS CONDICIONES -
AS ISCapacity: 9" x5"Spindle Diameters: 1-13/16"Spindle Configuration: Bottom - 10 HP, Right/Left
- 20 HP, Top - 20 HP, Bottom - 15 HPFeed Motor: 5 HPVariable Speed Feed78" Infeed TableSound/Safety Enclosure460v, 3ph
Year:
2001
AMXmachinery
ESPIGADORA DOBLE DE CADENA - SCMI
PARTE: 12413 – ESPIGADORA DOBLE DE CADENA - SCMI
USADA - BUENAS CONDICIONESSCMI Concept 2000 •
Opening Capacity: ~4'•
Two-Post Machine• First
Station: Left & Right Trim Saws• Trim
Saw Motors: 8 HP Each• Second
Station: Left & Right Jump-CopeUnits,
7000 RPM• Jump
Cope Motors: 11.5 HP Each• Third
Station: Left & Right Cope Units, 7000RPM• Cope
Motors: 11.5 HP Each• Load
Space: 32"• Rubber
Padded Feed Chains 2.75" Wide• Pop-Up
Dogs on 14-3/4" Centers•
Push-...