Identificador: 2620
Abierta
PARTE: 12590 – COMPACTADORA / EMBALADORA – PAPEL - CARTON – HORZONTAL – 20 HP
AMXmachinery
Descripción
PARTE: 12590 – COMPACTADORA / EMBALADORA – PAPEL - CARTON – HORZONTAL – 20 HP
USADO EN BUENAS CONDICIONES
Model 72 Automatic solves scrap handling problems efficiently and economically. For over the past 45 years, hundreds of Maren 72 Automatic Closed Door Manual Tie Balers have been installed across North America and beyond.
The Maren 72 Automatic produces “Mill Size” bales generating maximum revenue for your recycled product and a quick return on investment.
The Maren 72 automatic can bale a wide range of waste materials including paper trim, light foil, corrugated set-up box’s, shredded paper. The baler is also offered with an oversize feed hopper and shear knife.
Maren 72 automatic can be used in conjunction with pneumatic conveying systems, belt conveyors or feed chutes.
A photo-electric eye in the hopper controls the baling operation. When the light beam is Blocked by material, the baling cycle automatically starts and continues until the light beam is no longer blocked. The baler will not operate unless the hopper is filled. A buzzer sounds to alert the operator that the bale is complete. An operator is only needed to release the door, tie off and handle the bale—a part time job.
260/460v, 3 phase, 60hz, 50 amp
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PRENSA PARA PANELES CURVOS
PARTE: 2TY-80-2407 - PRENSA
PARA PANELES CURVOS
NUEVA CON GARANTIA
EJEMPLO ATAUDES
AMXmachinery
ROUTER INVERTIDO ONSRUD 24210
PARTE # 10097MARCA: C.R. ONSRUDMODELO: 24210MOTOR 10HP, 3 PH, 230V, 60 HZ24” CAPACIDAD GARGANTABROCA VIAJA 0-3”PEDAL NEUMATICO
AMXmachinery
ENCHAPADORA
PARTE # 2TA-EB-3B - ENCHAPADORA DE CANTOS RECTOSPARTE # 2TA-EB-4B - ENCHAPADORA DE CANTOS RECTOSPARTE # 2TA-EB-5B - ENCHAPADORA DE CANTOS RECTOSPARTE # 2TA-EB-6B - ENCHAPADORA DE CANTOS RECTOS Automatic feed station for: Gluing, Pneumatic Guillotine, Double End Trimming, Top & Bottom Edge Trimming, Edge Polishing.The feed of edging material, by ** strip ** or coil is automatic and synchronously with panel feed.Total enclosure covers with dust hood connector.Heavy and rigid construction to ensur...
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD ANCHO 24”
PARTE:
12330 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24”
USADO - BUENAS CONDICIONES