ID: 2620
Open
PARTE: 12590 – COMPACTADORA / EMBALADORA – PAPEL - CARTON – HORZONTAL – 20 HP
AMXmachinery
Description
PARTE: 12590 – COMPACTADORA / EMBALADORA – PAPEL - CARTON – HORZONTAL – 20 HP
USADO EN BUENAS CONDICIONES
Model 72 Automatic solves scrap handling problems efficiently and economically. For over the past 45 years, hundreds of Maren 72 Automatic Closed Door Manual Tie Balers have been installed across North America and beyond.
The Maren 72 Automatic produces “Mill Size” bales generating maximum revenue for your recycled product and a quick return on investment.
The Maren 72 automatic can bale a wide range of waste materials including paper trim, light foil, corrugated set-up box’s, shredded paper. The baler is also offered with an oversize feed hopper and shear knife.
Maren 72 automatic can be used in conjunction with pneumatic conveying systems, belt conveyors or feed chutes.
A photo-electric eye in the hopper controls the baling operation. When the light beam is Blocked by material, the baling cycle automatically starts and continues until the light beam is no longer blocked. The baler will not operate unless the hopper is filled. A buzzer sounds to alert the operator that the bale is complete. An operator is only needed to release the door, tie off and handle the bale—a part time job.
260/460v, 3 phase, 60hz, 50 amp
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12172 – TORNO COPIADOR - LOCATELLI BIG ARRIET
PARTE: 12172 – TORNO COPIADOR - LOCATELLI BIG ARRIET
USADO
– BUENAS CONDICIONESFully operationally
over
$9,000 in steady rests and tooling
max.
capacity 4" dia. x 6" length
Sequence
as follows;
roughing
knife
steady
rest
traveling
roughing knife
second
roughing pattern knife
finishing
pattern knife
parting
knife
Also
....if needed
end
boring bit or formed bit
second
end boring bit or formed knife with side sliding movementLocatelli Dime...
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...
AMXmachinery
CALDERAS DE BIOMASA – DESDE 3 KWT HASTA 30 MW TERMICOS
PARTE: 4UN-001
- CALDERAS DE BIOMASA – DESDE 3 KWT HASTA 30 MW TERMICOS
Calderas desde 300 KW hasta 30 MW térmicos, para agua
caliente, sobre calentada, vapor saturado y sobre aquesido, aceite térmico, las
cuales pueden quemar, o biomasa convencional, o biomasa no convencional.Valorizamos la biomasa y los subproductos derivados de
procesos agrícolas y industrialesTransformándolos en energía limpiaCombustible Biomasa – Rendimiento Alta Tecnología –
Emisiones Bajo a Zero Carb...
-500x500.jpg)
AMXmachinery
PEGADORA DE RACK
PARTE # 2CK-A-CRFR-08 - PEGADORA DE RACK DE 8 PIES DE LARGO Y 16 BRAZOSNUEVA CON GARANTIACARACTERISTICAS:- CAPACIDAD DE 8 PIES DE LARGO- 16 BRAZOS CON ABERTURA DE 32" CON GARRAS DE 3.5" ALTO X 4.75" ANCHO- DIMENSIONES: 104" ANCHO X 60" FONDO X 78" ALTO- PESO NETO 880 LBS, PESO ENVIO: 990 LBS- NO REQUIERE ELECTRICIDAD NI AIRE COMPRIMIDO- ESTE ES NUESTRO PAQUETE MAS POPULAROPCIONALES:- RACK DE 6 PIES DE LARGO CON 12 BRAZOS- RACK DE 12 PIES DE LARGO CON 24 BRAZOS- BRAZOS ADICIONALES DISPONIBLES- BR...