Identificador: 2722
Abierta
Descripción
PARTE: 12650 - CEPILLO - 4 CARAS - 24” ANCHO - PINHEIRO
Usado – Muy buenas condiciones
24" max. planing width
20" max. moulding width
3" min. moulding width
8" max. thickness capacity
16" min. length workpiece unbutted, 9" butt fed
7.5 HP top head
5.5 HP bottom head
side heads are 17.5 HP each
4 HP variable speed feed 20 to 100 FPM
Top and bottom heads are 4-knife straight knife cutter heads
Side heads are 5" dia. X 8" long 4-knife corrugated back cutter heads
1-13/16" dia. arbor on side heads
5,000 RPM spindle speed on side heads
power raise and lower of table
sectional feed rolls
(9) powered feed rolls
8" dia. dust hood on top head
7" dia. dust hood on bottom head
6" dia. dust hood on each side head
separate electrical control panel
Total HP 59; 440 Volt; 77 amps
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12198-2 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER
PARTE:
12198-2 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER
USADA – BUENAS CONDICIONESMod. Eco DS0 Manufacture year 1999
Multi-channel
to cut 4 boards at same timeInclude 1
frame of 500 mm blade and 1 for 400 mm blades.
480 Volts
AMXmachinery
CEPILLO MOLDURADOR 13" ANCHO
PARTE: 1SL-DC-WPM13 - CEPILLO MOLDURADOR 13" ANCHONUEVO CON GARANTIAMOTOR: 1.5 HP, 220V, 60 Hz, MONOFASICOTAMANO DE LA MESA: 18" X 14"CAPACIDAD DE CORTE: 13" X 6"MAX. PROFUNDIDAD DE CORTE: * 1/8" PARA TABLAS HASTA 5-1/2"13" * 1/16" PARA TABLAS MAYORES A 5-1/2"VELOCIDAD DE CABEZAL: 5000 RPMVELOCIDAD DE ALIMENTACION MOLDURADOR: 12 PIES/MINCAPACIDAD DE ANCHO EN MOLDURADOR: 2-1/2" A 6"DIMENSIONES MAQUINA: 44" ALTO X 24" ANCHO X 36" FONDOPESO: 120 KGSTIPO DE EMPAQUE: 2 CAJAS* L...
24,700.00 MXN
AMXmachinery
SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
PARTE:
12371 - SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
USADO
- MUY BUENAS CONDICIONES
Make HPC
Year 1997
Phase 3 PHASE
Voltage 220 VOLT
Estimated Dimensions
Foot print of line 52' x 15'
Estimated Weight 10,000
Lbs (approx)
DESCRIPTION:
HPC Double Sided
Automatic finger joint line
Station 1 squares one
end and cuts initial finger joint
Station 2 squares the
other end, cuts finger joint, and applies glue.
Station 3 assembles an...
AMXmachinery
COLECTOR ASERRIN 75 HP
PARTE # 12006 – COLECTOR DE ASERRIN EXTERIOR – 26,440 CFM – MOTOR 75 HP – DIXIEModelo: SPB-202-10Capacity 26,440 CFMBlower motor: 75HPRotary air lock Dixie #14Equipped with 202 bags 10' longSupplied with motor startersSteel Structure to Support Above CollectorNew in 2000Year Manufactured: 2000