Identificador: 1850
Abierta
Descripción
PARTE: 2AR-34102 – ACCESORIO PARA UNIONES COLA DE MILANO
NUEVA EN SU CAJA ORIGINAL
Use your router to make strong, beautiful dovetail joints
Cut tails, pins, half-blind and standard dovetails
Male and female dovetail cuts can be made in one pass
Cam-lock clamps quickly secure workpiece
Accepts stock up to 12 in. wide, 1-1/4 in. thick
Product Height: 10-1/4 in.
Product Length: 15-3/4 in.
Product Width: 17 in.
Shipping Weight: 17.40 lb.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 19-1/2” - MOTOR 3/4 HP
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 19-1/2” - MOTOR 3/4 HP
USADO - MUY BUENAS CONDICIONES -
TODOS LOS BALEROS NUEVOS
MOTOR 3/4 HP, 220/440V, 3 FASES, 60
HZ, 1500 RPM
DIAMETRO INTERNO: 19-1/2”
DIAMETRO EXTERNO: 22”
MEDIDAS TOTALES: 31” LARGO X 22” ANCHO
X 12” ALTO
CAUDAL: 8,712 M3/HR
HECHO EN MEXICO
AMXmachinery
SIERRA MULTIPLE – NEVA
PARTE:
12174 – SIERRA MULTIPLE – NEVA
Usada – Muy buenas condiciones
Modelo 2006
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIANuevo con garantíaFeatures:Weight150 lbsDimensions66 × 43 × 44 cmSupply240 volt / 50hz (standard 13-amp 3-pin plug)Generator frequencyNominal 27.2 MhzCuring speed3 – 10 seconds per weldPenetration50mm effectiveOutput0.5 – 0.6 amps at 2400 volts (internal HT) on loadFinishHardwearing powder coated finishElectrical SafetyCabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp...
AMXmachinery
ASERRADERO PORTATIL - 7 HP GASOLINA - 20” DIAMETRO
PARTE: 2EB-P44-20 - ASERRADERO PORTATIL - 7 HP GASOLINA - 20” DIAMETRO
Nuevo con garantíaHeavy duty portable7hp/301cc gas engineUp to 20 inches in
diameter, flat stock up to 20 inches wide and logs up to 9' 2"Runs on regular unleaded
gasoline for ease and cost efficiencySpecificationsHorsepower (hp) - 7Engine displacement (cc)
- 301ccBlade size - 1 1/4"
x 144" x 0.048"Blade speed - 3279 FPMShipping Weight - 722 lbs
Manufactures warranty -
90 days