Identificador: 2533
Abierta
Descripción
PARTE: 2CA-SM-65MO – MOLDURADORA – 1 LADO SUPERIOR – 6” ANCHO
Nuevo con garantía
Features:
Powered pneumatic upper & lower pressure rollers for through feeding and precise cutting.
Precision ground cast iron table for durability.
Rigidly mounted alloy steel spindle provides accurate vibration-free power transfer.
Heavy-duty sheet metal frame.
Heavy-duty alloy spindle for durability & run out free performance.
Spindle height adjustment by precision rack & pinion gears.
Magnetic overload switch for protection.
Totally enclosed TEFC motor with sealed for life ball bearings.
SPECIFICATIONS 2CA-SM-65MO
Max. Working Width 6"
Min. Working Width 1/2"
Max. Working Height 5"
Min. Working Height 1/2"
Spindle Diameter 40 mm
Spindle Speed 6000 RPM
Spindle Motor 5-1/2"
Feed Speed 12 ~ 30 FPM (5 Speed)
Feed Motor 1 HP Power 220V 3 PH
N.W. 1050 LBS
G.W. 1400 LBS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE BANDA ANCHA - 52” ANCHO - 3 LIJAS - TIMESAVERS
PARTE: 12294 - LIJADORA DE BANDA ANCHA - 52”
ANCHO - 3 LIJAS - TIMESAVERS
USADA BUENAS CONDICIONES
460/60/3 electrics
AMXmachinery
ROUTER PIN INVERTIDO - CR ONSRUD 36210
PARTE: 12127 - ROUTER PIN INVERTIDO - CR ONSRUD 36210
USADO – EN BUENAS
CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
10 HP motor, belt driven to spindle
25,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot
pedal
3" spindle travel
43" x 31" acrylic topped table
36" throat depth
3-Position adjustable depth stop, infinitely
adjustable
Maximum workpiece/template height is 4"
3/4" max. Chucking capacity
Magnetic starter with over...
AMXmachinery
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 12” - DAYTON
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 12” - DAYTONUSADO - MUY BUENAS CONDICIONESBALEROS MOTOR NUEVOSMedidas totales: 22” ancho x 15”
fondo x 12” altoDiámetro aspas: 12”Marca DaytonModelo: 4C659A
Motor: ¼ HP,
1725 RPM, 115/230V, 4.6/2.3 Amp, 1 faseVideo: https://vimeo.com/870515251
AMXmachinery
LINEA DE PINTURA CEFLA
PARTE: 12000 - LINEA DE PINTURA - CEFLAEN MUY BUENAS CONDICIONESPara mas informacion contectenosComponents:Cefla Sorbini Infeed conveyor T/S-R-VS (2010) 220V 1.6KWCefla Falcioni Unospray 1300 (2005) 220V 10.5KW Cefla Sorbini Outfeed conveyor (2005) 220V 0.4 KW 510KgPresurized Water Heated Spray Cabin LPS 50-70 (2010) 220V 6.2KW 5m x 7mCefla Sorb...