Identificador: 25
Abierta
Descripción
PARTE: 2TA-TG-6000 – AFILADORA DE CUCHILLAS RECTAS - 26" LARGO
Nueva con garantia
Features:
Heavy-duty straight knife grinder, rapid for grinding processing and saving time.
Economical model and efficiency for processing high powerful of any straight knife grinding such as Planner & Jointer Knife, Peeling Knife, Super Surface Knife, and Veneer Cutting Knife.
Automatic grinding table movement forward and backward, label saver.
Employed with straight linear motion guides bearing to ensure longitudinal feed traverse smoothly and accurately.
The knife can be put through a coarse wheel grinding, then a fine wheel grinding for sharpening the knife edge again to obtain the super sharp edge and extend the cutting life of the knife.
Built in coolant pump for faster grinding.
Heavy sheet metal cabinet stand and cast iron body.
High precision and durability.
SPECIFICATIONS | 2TA-TG-3000 | 2TA-TG-5000 | 2TA-TG-6000 |
Grinding Capacity |
|
|
|
Cutter (Dia. x W) | 9" x 8" | N/A | N/A |
Carbide Saw (Dia. x T) | 20" x 3/8" | N/A | N/A |
Carbide Knife (L x W x T) | 12" x 1½" x ¼" | 25" x 3" x 5/8" | 25" x 3" x 5/8" |
Router Bits (Shank) Max. | ½" | N/A | N/A |
Grinding Wheel Size | 6" x 5/8" | 4" x 2" x 5/8" | 10" x 2/3" x 1" |
Grinding Head Travel | 14" | 26" | 26" |
Grinding Wheel Speed | 5000RPM | 1700 RPM | 1700 RPM |
Fine Grinding Wheel Size | N/A | --- | 4" x 2" x 2" |
Grinding Wheel Motor | 1 HP | ½ HP | 1 HP |
Fine Wheel Motor | N/A | --- | --- |
Table Size | 28' L x 8" W | 26" L | 27" L |
Table Travel | 20" x 7" | (Wheel) | 28" |
Table Travel Motor | --- | ¼ HP | ¼ HP |
Coolant Pump Motor | 1/8 HP | N/A | 1/8 HP |
N.W. (LBS) | 748 LBS | 340 LBS | 660 LBS |
G. W. (LBS) | 924 LBS | 430 LBS | 836 LBS |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
POSTFORMADORA CONTINUA 1 LADO
PARTE # 2EV-6000 - POSTFORMADORA CONTINUA 1 LADO - EVANS 6000220 Volt 1 phase, 220 volt 3 phaseStandard Features:Floating Laminate Trimmer (conventional router)Three phase machines require a separate 110 connection Quick-change 90 and 180 degree roller assembles.Infrared radiant panel heater (instant on / off)Foot print: 130”L X 36”W X 50”HMaximum Feed rate 15 feet per minute.Feed motor: 1/3 hp variable speed DC drive.Crated dimensions 125 x 40 x 60Created weight 1750 LBS....
AMXmachinery
MESA ESCUADRADORA DESLIZABLE
PARTE # SIL-DC-ST0408 - MESA ESCUADRADORA DESLIZABLE DE 4 PIES X 8 PIESCapacidad de corte longitudinal: 50” (1270 mm)Accesorio para Sierras DC-MBS250 Y DC-MBS300
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2BF-SK-20DS - LIJADORA DE TAMBOR DE 20" DE ANCHO - 1 FASEPARTE # 2BF-SK-20DS3 - LIJADORA DE TAMBOR DE 20" DE ANCHO - 3 FASESPARTE # 2BF-SK-25DS - LIJADORA DE TAMBOR DE 25" DE ANCHOPARTE # 2BF-SK-37DS - LIJADORA DE TAMBOR DE 37" DE ANCHOMODELOSK-20DSSK-25DSSK-37DSMax sanding width:508mm (20")635mm (25")939mm (37")Sanding thickness:100mm (4")100mm (4")100mm (4")Table dimensions:508mm x870mm635mm x870mm939mm x870mm(20" x 34-1/4")(25" x 34-1/4")(37" x 34-1/4")Sanding drum :150mm (6")150mm (6...
AMXmachinery
AFILADOR MANUAL PARA CUCHILLAS – 609 MM LARGO
PARTE: 1SL-DC-AFMAN
- AFILADOR MANUAL PARA CUCHILLAS – 609 MM LARGONUEVO CON GARANTIAMOTOR: 1/2 HP, 110V, 60 Hz, 1 FASELONGITUD MAXIMA DE AFILADO: 609 MMANCHO MAXIMO DE AFILADO 50 MMMOVIMIENTO TRANSVERSAL MAXIMO MESA: 200 MMINCLINACION DE LA GUIA: 15 - 90 GRADOSDIAMETRO DE LA PIEDRA DEL ESMERIL: 150 MMGUIA: 600 MMDIMENSIONES DE LA MAQUINA: 740 X 560 X 1320 MMPESO DE LA MAQUINA: 36 KGS