ID: 1880
Open
Description
PARTE: AMX-10131 - EXTRACTOR DE TUBO - ASPAS 12” DIAMETRO - MOTOR 1/2 HP - CINCINNATI FAN
USADO - BUENAS CONDICIONES
MOTOR 1/2 HP, 280/440V, 3 FASES
MEDIDAS: 12” DIAMETRO INTERIOR X 14” DIAMETRO EXTERIOR X 20” FONDO
HECHO EN USA
Payments & Returns
- Payment Methods
- PayPal, Visa/Mastercard/American Express
Postage & Shipping
- Item Location
- 31104, Chihuahua, Mexico
- Ships To
- Mexico
- Pick-ups
- Buyer can pick-up
- Returns Accepted
- No
Post Message
Sign in to ask the seller a question.
AMXmachinery
TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear
Driven Spindles on 32mm Centers
Index
Pins
3
HP Spindle Drive Motor, TEFC
10mm
Bored Collets
(12)
Right Hand, (11) Left Hand
12″
Throat Depth
60″
Back Fence With (4) Stops
24″
X 48″ Work Table Surface
(2)
Spring Operated Hold Downs
Wired
3-Phase 240/480 Volt, 60 Hz.
Pneumatic
Driven Boring Cycle
Tooling
Not In...
AMXmachinery
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVEN
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVENUsada - Muy buenas condicionesFeatures and Specifications:Saw capacity of 6" width x 8" vertical capacity. Minimum working 2” high X 12” long. Main drive motor to saw frame is 30HP 3PH, wired 460 VServo drive system to feed works is 1/4HP 3PHBlower to saw frame rack for added cleaning value is 3HP 3PHBody of frame saw is (2) sections allowing for fast access to the saw frameSaw blade speed is fixed at 550RPMDust extraction requires min 3000 CFM and...
AMXmachinery
SIERRA INGLETEADORA 10" DESLIZANTE
PARTE # SIL-DC-SI10-D - SIERRA INGLETEADORA DE 10" DESLIZANTENUEVA CON GARANTIAMOTOR: 2 HP, 110V, 60 Hz, 1 FASESDIAMETRO DEL DISCO: 10"DIAMETRO FLECHA: 5/8"VELOCIDAD DEL DISCO: 4500 RPMRANGO DE GIRO DE LA MESA: 45 GRADOS DERECHA E IZQUIERDAPESO: 19 KGS
AMXmachinery
PROFILE KNIFE GRINDER - RONDAMAT 960
PARTE: 12306-E - PROFILE KNIFE GRINDER - RONDAMAT 960USED - GOOD CONDITION9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant tank w/ 1.2 HP pump