Identificador: 1922
Abierta
PARTE: AMX-10139 - EXTRACTOR CENTRIFUGO - MOTOR ½ HP, 220/440V, 3 FASES - SALIDA PLANA - FM ITALY
AMXmachinery
Descripción
PARTE: AMX-10139 - EXTRACTOR CENTRIFUGO - MOTOR ½ HP, 220/440V, 3 FASES - SALIDA PLANA - FM ITALY
USADO - BUENAS CONDICIONES
MEDIDAS: 24.5” ANCHO SALIDA PLANA X 27.5” FONDO X 18” ALTO
MOTOR ½ HP, 220/440V, 3 FASES, CERRADO
MARCA: FM ITALY
HECHOS EN EUROPA
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOLDURADORA 4 CABEZALES
PARTE # 32RM-M413 – MOLDURADORA – 5” ANCHO – 4 CABEZALESNUEVA CON GARANTIACARACTERISTICAS220V/60HZ/3PH1) 1st bottom spindle:3kW, Φ40mm, 6000 RPM – 4 HP2) right spindle: 3kW, Φ40mm, 6000 RPM – 4 HP3) left spindle: 4kW, Φ40mm, 6000 RPM – 5HP4) top spindle: 4kW, Φ40mm, 6000 RPM – 5 HPFeeding motor: 3Kw – 4 HP Stepless variable fe...
AMXmachinery
PARTE: 3NN-VENEERSOLIDM1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPA
PARTE: 3NN-VENEERSOLIDM1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPAChapa Pre-Engomada requerida Machine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.35 ~ 1.5 mm(solutions of splicing veneers with thickness of 1.5 ~ 3.5 mm offered)Veneer Strip Length：min. 200 mmVeneer Strip Width：min. 45 mmProduction Speed：up to 30 m/min.Electric Power：approx. 5.9 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：800 mmDimensions (L x W x H)：1...
AMXmachinery
SIL-DC-PJ1E
PARTE # SIL-DC-PJ1E - GATO PARA TARIMA - CAPACIDAD 1 TON - CON ELEVADOR 80 CMSNEUVO CON GARANTIACAPACIDAD MAXIMA 1 TONELEVACION MAXIMA 80 CMSCON LLANTAS DE POLIURETANO
AMXmachinery
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
PART:
1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on
mechanical parts onlyEach notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400
lb.