Identificador: 2471
Abierta
Descripción
PARTE: 4RI-UNI-X 2200 - PERFORADORA DE CLAVIJAS
• Drilling from 4 sides: top, right, left, back
• Capacity up to 14 pcs/min
• Set-up help using light beam
• Vertical magazine
• One-man operated
Extra
• Side movement
• Small millings
• 45 degree drilling
• Can be integrated in a line of machines
• Waste Conveyer
- Length:
250 – 2200 mm - Height:
10 – 65 mm - Width:
25 – 200 mm
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
MESA DE AIRE
PARTE: 2DO-TA-2 - MESA DE AIREIs designed for effortless handling of panels. Is typically
used to handle heavy loads without effort.Table dimensions: 3' x 5'9 self-releasing flotation outlets per square footEach outlet is self-locking by polyethylene ballsIncludes a built-in air flotation turbinePneumatic stroke up/down to lift panel to same working height than the edgebanderUp/Down stroke movement is triggered manually by operator on foot pedalPower and control components are installed into...
-500x500.png)
AMXmachinery1
SIERRA DE PANELES MANUAL
PARTE: 3HO-MJ6132TY - SIERRA DE PANELES MANUALThe sliding table saw for longitudinal, transverse and angular cutting of panel materials (MDF, fibreboard, chipboard and glued panels) faced and laminated, as well as blanks made of solid wood, with preliminary trimming of the lower edge to prevent chipping.Table Guide Length*Width3200mm*375mm(Optional)Max. Cutting Height at 90°80mmMain Spindle Diameter30mmMain Saw Diameter300mm(250-300mm)Main Saw Speed(r.p.m)4000/6000Motor Power(Main+Scoring)5.5kw...
AMXmachinery1
CONECTOR DE RAMA
PARTE: 2EX-DA-LT0404 - CONECTOR DE RAMAOffers lateral tee branches for branching a main trunk line with trunks available in 4 to 18 inch diameters and branches available in 4-16 inch diameters.
-500x500.png)
AMXmachinery1
CABEZAL DE CORTE CORRUGADO HIDRAULICO TRASERO
PARTE: 3CH-HFBB - CABEZAL DE CORTE CORRUGADO HIDRAULICO TRASEROBore that can be fits in general 4-side high speed moulders/planers.Standard specifications with single angle 12 or 20 degrees.