Identificador: 2471
Abierta
Descripción
PERFORADORA DE CLAVIJAS
• Drilling from 4 sides: top, right, left, back
• Capacity up to 14 pcs/min
• Set-up help using light beam
• Vertical magazine
• One-man operated
Extra
• Side movement
• Small millings
• 45 degree drilling
• Can be integrated in a line of machines
• Waste Conveyer
- Length:
250 – 2200 mm - Height:
10 – 65 mm - Width:
25 – 200 mm
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ENLAZADORA DE CAJONES MANUAL
ENLAZADORA DE CAJONES MANUAL 2CK-JDT65Produces both the pin and tail of the dovetail simultaneously. All four sides of the drawer can be loaded into the machine for optimum production capacity. The operator controls the dovetail unit by following a simple template allowing for ease of operation and quality joints. Equipped with a choice of four pitch templates for varying types of dovetail joints.Ideal for drawer production and furniture parts which require high quality doveta...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
-500x500.png)
AMXmachinery1
SIERRA PARA CORTE, RECORTE Y RANURADO
PARTE: 2PI -TSS - SIERRA PARA CORTE, RECORTE Y RANURADOWas designed to cut materials that are susceptible to tear out as well as pack cutting of multiple parts at the same time.Tear-out FREE! Absolutely no tear-out on the cut boardsVery safe operation for the userMore accurate than a manual chop sawFrame is designed to sit flat or tilted at 10 degree angleTigerStop ready
AMXmachinery1
SIERRA CINTA 37" - 2 EN 1 - 10HP
SIERRA CINTA 37" - 2 EN 1 - 10HP - 2CK-HB950AIs a heavy duty bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 10HP motor allowing you to make your cuts with ease. With a large cutting height capacity under the guide of up to 22” it can also b...