Identificador: 901
Abierta
Descripción
PARTE # 11825 – PINCH ROLLER – EVANS 0206
Mint condition, very little use and very low wear
MODEL: 0206
ELECTRICS: 0.75KW, 115V, 1 PHASE, 60 HZ
50” LENGHT CAPACITY
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12553 - SIERRA TRONZADORA - 5 HP - GRUTTER
PARTE: 12553 - SIERRA TRONZADORA - 5 HP - GRUTTERUSADA
- BUENAS CONDICIONES
AMXmachinery
PART: 12565-E - DUST COLLECTOR - MOTOR 10 HP - BELFAB
PART: 12565-E - DUST
COLLECTOR - MOTOR 10 HP - BELFABUSED - VERY GOOD
CONDITIONMain Motor: 10 HP, 230/460v, 3phStart/Stop
Station for 230v, 3phChip Collect in
Two Lower Plastic Bags
Filtration Surface (sq.ft): 331.63
AMXmachinery
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAOne way feeding onlyWork width: 250 mm (25 degrees), 55 mm (60 degrees)Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variableFeed speed: 88 m/min (60hz), 73 m/min (50hz)Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw2 knife stocks on top and bottom surfacesKnife type: Changing blade typeKnife size: 335 length x 66 x 8 mmAccessories: Changing blades and standard toolsMachine size: (WxLxH...
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD ANCHO 24”
PARTE:
12329 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - NORTHFIELD
USADO - BUENAS CONDICIONES24" width cap. x 6"
thickness cap.Upper spring loaded staggered
hold down fingersTop/Bottom helical carbide
heads30HP; 3PH upper cutterhead
motorapprox 20HP; 3PH lower
cutterhead motor5HP; 3PH variable speed feed
motor with gear reducer1HP; 3PH platen elevation
motor56" central distance
between cutterheads4" solid steel power
driven lower feed rollsUpper sectional feed rollsFeed Speeds Adju...