Identificador: 956
Abierta
Descripción
PARTE: 12092 - PINCH ROLLER – MIDWEST 2150
USADA - EN BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA DOBLE 45 GRADOS - CTD D45X
PARTE # AMX-10052 - SIERRA DOBLE 45 GRADOS - CTD D45XEN MUY BUENAS CONDICIONESMARCA: CTD MACHINES INCMODELO: D45X2 MOTORES: 2 HP, 115/230V, 1 FASE, RPM 34502 SIERRAS DE CORTE PARA MADERA DE 12” DIAMETROHECHA EN USA
AMXmachinery
TALLADORA DE MADERA
PARTE: 2LO-CM-8CAR - TALLADORA DE MADERAFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees.Custom o...
AMXmachinery
LIJADORA QUICKWOOD
PARTE: 12052 – LIJADORA QUICKWOOD ELITE PRO1100Usada en muy buenas condicionesMachine has been cleaned & checked.240 Volt 3-PhaseComplete with dust hose & manifoldQUICKWOOD ELITE PRO 1100* MAX WIDTH OF WORKPIECE...43"* MAX HEIGHT OF WORKPIECE...3.9"* MAX LENGTH OF WORKPIECE...INFINITE* LINEAR SPEED OF BELT...2-12 M/MIN (6-36 FT/MIN)* ROTATIONAL SPEED OF BRUSH CAROUSEL...3-16 G/MIN* ROTATIONAL SPEED OF BRUSH SPINDLES...300-1150 G/MIN* (4) DUST EXTRACTION OUTLETS (170MM DIA / EA)*...
AMXmachinery
REASERRADORA - 1 SIERRA 12"
PARTE: 2LO-BS-1212HR - REASERRADORA HORIZONTAL – 1 SIERRANUEVA CON GARANTIAMachine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.It is equipped with a digital controller for convenient and accurate thickness setting.The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.Variable feed spee...