Identificador: 96
Abierta
Descripción
PARTE # 2EV-6000 - POSTFORMADORA CONTINUA 1 LADO - EVANS 6000
220 Volt 1 phase, 220 volt 3 phase
Standard Features:
Floating Laminate Trimmer (conventional router)
Three phase machines require a separate 110 connection
Quick-change 90 and 180 degree roller assembles.
Infrared radiant panel heater (instant on / off)
Foot print: 130”L X 36”W X 50”H
Maximum Feed rate 15 feet per minute.
Feed motor: 1/3 hp variable speed DC drive.
Crated dimensions 125 x 40 x 60
Created weight 1750 LBS.
Option:
High Frequency trimmer (single or three phase)
Extra Cassette
Video de la maquina trabajando: VIDEO 1
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
MOLDURADORA 9" ANCHO
PARTE # 2TA-SM-236C - MOLDURADORA - 9" ANCHO, 6 CABEZALESPARTE # 2TA-SM-236U - MOLDURADORA - 9" ANCHO, 6 CABEZALESPARTE # 2TA-SM-237U - MOLDURADORA - 9" ANCHO, 7 CABEZALESNueva con garantiaFeatures:Hard chrome plated table for maximum wear resistance.Fully enclosed safety guard reduces noise and completely prevents chips splashing.Anti-impact plate for over-width and over-thickness protection.Oversized top and bottom rollers run synchronized, ensuring smooth feeding.FRP plastic steel safet...
AMXmachinery
PARTE: 1SL-DC-PJ3 - GATO PARA TARIMAS - CAPACIDAD 3 TONS
PARTE: 1SL-DC-PJ3 - GATO PARA
TARIMAS - CAPACIDAD 3 TONSNUEVO CON GARANTIA
AMXmachinery
PARTE: 12567 - REASERRADORA HORIZONTAL - 1 BANDA - 6” ANCHO X 6” ALTO - BAKER
PARTE:
12567 - REASERRADORA
HORIZONTAL - 1 BANDA - 6” ANCHO X 6” ALTO - BAKER
Usada - Buenas condiciones
3 Phase | 570V | 30HP |
Capacity is roughly 6" wide x 6" tall
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...