Identificador: 97
Abierta
Descripción
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100
220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz.
17 kw (no air required) Standard work height 37”.
Standard Features:
90 and 180 degree setup
Quick-change 90 and 180 degree roller assembles each side.
Maximum material width 48"
Heaters: Infrared radiant panel (instant on / off)
Foot print: 107”L X 72”W X 44”H, Work height 37”
Maximum Feed rate 10 feet per minute.
Feed motor: ½ hp variable speed DC drive.
Crated weight 2400 LBS. Shipping dimensions 115” long X 80” wide X 55” high.
Options:
2 High Frequency motors for trimming 90 degree bends
Slitter motor with blade (for counter top operations)
Bevel shape set-up part # 6100-01 (both sides)
40” work height add
--------------------------------------------------------------------------------------------------------------
Proven a perfect fit around the world, in all size operations.
- Quick change 90 & 180 degree forming rollers
- Energy saving instant on-off radiant heater
- Optional high frequency floating trimmers
Double sided, single stage, automatic post former. It gives you the ability to postform a variety of laminate materials around profiled edges.
This machine is ideal for post forming kitchen counter tops, desk tops, cabinet doors and drawer fronts. The Model 6100 Feed Through Post Former gives you precise 90 degree, 180 degree, or a combination of 90 degree/180 degree on both sides of your product at the same time.
The 6100 is a flow through post former with options for trimming and a slitting saw for cutting a backsplash. Compare the price and features of the 6100 Feed Through Post Former with any other automatic post former.
Technical Specifications:
Feed Motor: 1/2 HP, DC
Electrical: 220 VAC 3 Phase 60 HZ
Power Consumption: 13 - 17 KW
90o Laminate: 3/4HP per Station
Floating Trimmers (optional)
Slitter Saw Motor (optional): 2 HP
Material Length: Min. 48”
Material Width: Max. 48.5”
- Without Saw: Min. 8”
- With Saw: Min. 16.5”
Material Thickness Min. 0.63” Max. 1.75”
Heater: Infrared Radiant Panel
Feed Speed: Up to 10 Ft/Min.
Build-Down: 90 - 180 degres
- Thickness Max. 1.25” Max. 0.75”
- Depth Max 1.75” Max. 1.75”
Machine Length 107”
w/o infeed & outfeed fence
Working Height: 37”
Shipping Weight: 2100 LBS
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
COMPRESOR DE TORNILLO – 20 HP – SULLAIR RSVS 12
PARTE: 12103 – COMPRESOR DE TORNILLO – 20 HP – SULLAIR RSVS 12Usado – En buenas condiciones20 HP, 230/460V, 3 FASES, 60 HZ, 1755 RPMVideo disponible
AMXmachinery
PARTE: 2TA-DC7500 - CORTADORAS DE PERNOS - ¼” - ¾” - PARA HACER TAQUETES RAYADOS - ALTA VELOCIDAD
PARTE:
2TA-DC78 - CORTADORAS DE PERNOS - ¼” - ¾” -
PARA HACER TAQUETES RAYADOSNUEVA CON GARANTIAFeatures:High
production, high speed.Can
auto sift out dowel which length is insufficient.Each
spiral fluting, straight fluting, smooth and dowels with dowel cross-cut and
chamfering from DC-7500.Capacity:
about 7,500-15,000 dowels/hour with infinitely variable speed change.Cutting
length range: 30-150 mm.Accuracy
turbine and turbine shaft perform feeding transfer, lubrication for trans...
AMXmachinery
CEPILLO 4 CARAS – 16” ANCHO - MIDA
PARTE:
12283 – CEPILLO 4 CARAS – 16” ANCHO - MIDA
USADO –
MUY BUENAS CONDICIONESYear 2002Motor Power 37,4 kWVoltage 400 V (three-phase)C.E. YesAbres 4Largueur min/max. Travail 420
mmHauteur min/max. Travail 11 -
300 mmLongueur table travail 1000 mmTotal Nº axis 4Bottom horizontal axis Yes 11
kWDrill right axis Yes 6,6 kWDrill left axis Yes 6,6 kWUpper horizontal axis Yes 13,2
kWVitesse d avance 3-30 m/minDiametre rouleaux avancement
90 mmDrag upper number 3Transmission Type Ca...
AMXmachinery
SIL-DC-PJ1E
PARTE # SIL-DC-PJ1E - GATO PARA TARIMA - CAPACIDAD 1 TON - CON ELEVADOR 80 CMSNEUVO CON GARANTIACAPACIDAD MAXIMA 1 TONELEVACION MAXIMA 80 CMSCON LLANTAS DE POLIURETANO