Identificador: 97
Abierta
ID de articulo : # 97 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100
220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz.
17 kw (no air required) Standard work height 37”.
Standard Features:
90 and 180 degree setup
Quick-change 90 and 180 degree roller assembles each side.
Maximum material width 48"
Heaters: Infrared radiant panel (instant on / off)
Foot print: 107”L X 72”W X 44”H, Work height 37”
Maximum Feed rate 10 feet per minute.
Feed motor: ½ hp variable speed DC drive.
Crated weight 2400 LBS. Shipping dimensions 115” long X 80” wide X 55” high.
Options:
2 High Frequency motors for trimming 90 degree bends
Slitter motor with blade (for counter top operations)
Bevel shape set-up part # 6100-01 (both sides)
40” work height add
--------------------------------------------------------------------------------------------------------------
Proven a perfect fit around the world, in all size operations.
- Quick change 90 & 180 degree forming rollers
- Energy saving instant on-off radiant heater
- Optional high frequency floating trimmers
Double sided, single stage, automatic post former. It gives you the ability to postform a variety of laminate materials around profiled edges.
This machine is ideal for post forming kitchen counter tops, desk tops, cabinet doors and drawer fronts. The Model 6100 Feed Through Post Former gives you precise 90 degree, 180 degree, or a combination of 90 degree/180 degree on both sides of your product at the same time.
The 6100 is a flow through post former with options for trimming and a slitting saw for cutting a backsplash. Compare the price and features of the 6100 Feed Through Post Former with any other automatic post former.
Technical Specifications:
Feed Motor: 1/2 HP, DC
Electrical: 220 VAC 3 Phase 60 HZ
Power Consumption: 13 - 17 KW
90o Laminate: 3/4HP per Station
Floating Trimmers (optional)
Slitter Saw Motor (optional): 2 HP
Material Length: Min. 48”
Material Width: Max. 48.5”
- Without Saw: Min. 8”
- With Saw: Min. 16.5”
Material Thickness Min. 0.63” Max. 1.75”
Heater: Infrared Radiant Panel
Feed Speed: Up to 10 Ft/Min.
Build-Down: 90 - 180 degres
- Thickness Max. 1.25” Max. 0.75”
- Depth Max 1.75” Max. 1.75”
Machine Length 107”
w/o infeed & outfeed fence
Working Height: 37”
Shipping Weight: 2100 LBS
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12568 - REASERRADORA HORIZONTAL - 2 BANDA - 6” ANCHO X 6” ALTO - BAKER
PARTE:
12568 - REASERRADORA
HORIZONTAL - 2 BANDA - 6” ANCHO X 6” ALTO - BAKER
Usada - Buenas
condiciones
460V | 3 Phase | 22’ in length | 2 20HP saw
motors | Extra parts including 5-6 bands
AMXmachinery
ARMADORA DE TARIMAS Y APLIADOR - PALLET CHIEF
PARTE: 12357 – ARMADORA DE TARIMAS Y APLIADOR - PALLET
CHIEF
USADA – MUY BUENAS CONDICIONES
AMXmachinery
DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
PART:
AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
Used
- Good condition
Two (2) saws fixed at 45° angle (saw heads are adjustable up
to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase, currentle
connected to 220V
3,900 blade RPM
Back fence
2 New On/Off
Switches with magnetic starters
2 Saw blades installed 10” diameter,
Cutting
capacity with 10" blades:
2-1/2" width x 3-1/4" height
Machine capacity up to 12” diameter...
AMXmachinery
PARTE: 12516 - COMPRESOR TORNILLO - INGERSOL-RAND – 20 HP
PARTE: 12516 - COMPRESOR TORNILLO - INGERSOL-RAND – 20 HP
USADA - BUENAS CONDICIONES
220/440V, 3 FASES, CONECTADO ACTUALMENTE A 440V