Identificador: 95
Abierta
Descripción
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190
Para hacer dobles para Back Splash
- 110V, 1 phase, 15 amps
- 220V, 1 phase, 8 amps
- Air: 80 PSI
- 12' maximum capacity (3660 mm)
- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm)
- Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)
- Crated weight 1800 LBS.
- Shipping dimensions 182” long X 34” wide X 50” high
- Bends inside cove bends for back splashes. The 0190 is available with either a 1/8", 3/16" or 3/8" radius coving rod heater that is thermostatically controlled. Other options available include a timer and pneumatic bending clamps.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 2 CARAS - ANCHO 24” - CANTEK
PARTE:
12408 - CEPILLO 2 CARAS - ANCHO 24” - CANTEK
USADO - EN BUENAS
CONDICIONES
Top cutterhead motor 30 HP 460 volts Helical cutterhead
Bottom cutterhead motor 25 HP 460 volts straight knife
cutterhead
Feed motor 5 HP on spike carpet feed system 25 to 95 fpm
Digital control panel
Capacity 3/8” to 6-1/2” thickness
Max lumber width 24”
Min lumber length 15”
AMXmachinery
PARTE: 2AM-U-500 - ARMADORA DE MARCOS PROGRAMABLE - 1 CANAL
PARTE: 2AM-U-500 - ARMADORA DE MARCOS PROGRAMABLE - 1 CANALOur U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining. The U-500 has the same user-friendly, touch screen interface as our U-600 Underpinner. The only difference between the two models being the U-500 has single channel capacity compared to a multi-channel with the U-600 unit.With data storage of 5,000 different frame profiles, the operator can easily recall...
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD ANCHO 24”
PARTE:
12329 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - NORTHFIELD
USADO - BUENAS CONDICIONES24" width cap. x 6"
thickness cap.Upper spring loaded staggered
hold down fingersTop/Bottom helical carbide
heads30HP; 3PH upper cutterhead
motorapprox 20HP; 3PH lower
cutterhead motor5HP; 3PH variable speed feed
motor with gear reducer1HP; 3PH platen elevation
motor56" central distance
between cutterheads4" solid steel power
driven lower feed rollsUpper sectional feed rollsFeed Speeds Adju...
AMXmachinery
PARTE: 2EB-DK2 - ASTILLADOR A GASOLINA – 14 HP – MAX DIAMETRO 6.25”
PARTE:
2EB-DK2 - ASTILLADOR A GASOLINA – 14 HP – MAX DIAMETRO 6.25”
NUEVA CON GARANTIAFeatures
dual swing chutes, 13-inch cutting blades, DOT road-legal tires, and a 36-inch
extended axle. The load chute is pickup truck height and the engine is covered
by a Commercial Command Pro 3-Year Kohler warranty.The
14 HP Kohler Commercial engine has an RPM of 3,600, and the dual 13-inch
cutting blades auto-adjust to pulverize brush and up to 6.25-inch diameter
trees. For increased longevi...