Identificador: 95
Abierta
Descripción
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190
Para hacer dobles para Back Splash
- 110V, 1 phase, 15 amps
- 220V, 1 phase, 8 amps
- Air: 80 PSI
- 12' maximum capacity (3660 mm)
- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm)
- Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)
- Crated weight 1800 LBS.
- Shipping dimensions 182” long X 34” wide X 50” high
- Bends inside cove bends for back splashes. The 0190 is available with either a 1/8", 3/16" or 3/8" radius coving rod heater that is thermostatically controlled. Other options available include a timer and pneumatic bending clamps.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOLDURADORA 6" - 8" ANCHO
PARTE # 2TA-SM-155A - MOLDURADORA - 6" ANCHO, 5 CABEZALESPARTE # 2TA-SM-156A - MOLDURADORA - 6" ANCHO, 6 CABEZALESPARTE # 2TA-SM-205A - MOLDURADORA - 8" ANCHO, 5 CABEZALESNueva con garantiaFeatures:Hard chrome plated table for maximum wear resistance.Fully enclosed safety guard reduces noise and completely prevents chips splashing.Anti-impact plate for over-width and over-thickness protection.Oversized top and bottom rollers run synchronized, ensuring smooth feeding.FRP plastic steel safet...
AMXmachinery
REASERRADORA HORIZONTAL – 1 SIERRA BANDA – 300 MM ANCHO X 250 MM ALTO
PARTE:
3HP-HP-12E - REASERRADORA HORIZONTAL – 1 SIERRA BANDA – 300 MM ANCHO X 250 MM
ALTO
Nueva con garantía
Specifications:
1.Max. workpiece size: 300mm(W) x 250mm(H)
2.Distance from blade to conveyor Table: 4-125mm
3.Conveyor belt size: 285mm x 5470mm
4.Saw wheels dimension: Φ28" x
1"(Thickness)
5.Feed speed: 5-25 M/min
6.Saw blade size: 168" x 1"
7.Saw wheel motor: 20HP
8.Conveyor motor: 2HP motor with 30:1 gear box
and 2HP inverter
9.Inverter cont...
-500x500.jpg)
AMXmachinery
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 120” ANCHO
PARTE: 2TA-SET-106TS –
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 120” ANCHO
Nueva con garantiaOpcionales:Extra Infeed 42” LengthTotal Enclosure CoverFeed MagazineAuto Transfer Line (4 ft x 8 ft) Transfer TableOptional Jump Shaper and Finish Shaper Cutter headsOptional Center Split Saw Station Features:• The automatic high-speed through feed device allows for
perfect finishing at speeds rangingfrom 12 ~ 52 FPM.• Suitable for mass production of woodworking factory for
processin...
AMXmachinery
PARTE: AMX-10156 - EXTRACTOR DE TURBINA - 3 HP
PARTE: AMX-10156 - EXTRACTOR DE TURBINA - 3 HP
USADO - MUY BUENAS CONDICIONES
MOTOR: 3 HP (2.2 KW), 220/460V, 3
FASES
ENTRADA REDONDA: 10”
SALIDA RECTANGULAR: 4” X 6”
MEDIDAS TOTALES: 22” ANCHO X 17”
FONDO X 25” ALTO