ID: 2458
Open
Description
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
USADA - BUENAS CONDICIONES
Curing area: 36” x 60” x 2” thick.
Clamping pressure is applied by multi-power (dual pistons on a common shaft) pneumatic cylinders to maximize pressure while relying on standard plant pressures. Unlike presses without multi-power cylinders, which require booster compressors, the Model SL36x60 reaches full capacity at 100-psi plant air pressure.
Edge pressure is applied by eight (8) each pusher shoes, each with a 4” bore x 4” stroke twin-piston multi-power pneumatic cylinders.
Top platen pressure is applied by two (2) 5” diameter x 16” stroke pneumatic cylinders through a cantilever arm that keeps the footprint to a minimum while still allowing the operator full access to the platen area.
The platen is set at a 45-degree angle and the top platen opens wide; allowing the operator to step inside the press for ergonomic and accurate parts placement.
The internal solid state RfsProtech 6KW Generator cures approximately 600 square inches of glue line per minute.
The Generator features solid state rectifiers and all aluminum cabinet for maximum conductivity and superior performance.
Two-hand no-tie-down safety controls for closing the top platen.
Controls are simple to understand, and are complete with the required push-buttons, switch, meters, digital operator display, and on-screen troubleshooting diagnostics.
The machine is controlled by a PLC for dependability and efficient maintenance. All controls will be provided for safe and efficient operation. The operator screen permits efficient operation, and the included press diagnostics screens assist in trouble-shooting when the need arises.
Proper interfaces will be provided for operational signals and emergency system stop.
All necessary RF controls, including buttons, meters, and PLC operator interface panel are mounted on a control panel attached to the left front of the press.
Interlocked top platen and safety switches on all access doors insure operator safety.
Power requirements are 480 volt, 60 cycle, 3 phase electric.
Circuit breaker protection is provided. A service disconnect is required for safety, but is not provided.
Powered In-Feed table with motor and controls
Out-feed steel deck
Voltage 480 volts 60 Hz
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
TRITURADORA - ORILLAS CHAPA, PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5SC
PARTE: 12550 - TRITURADORA - ORILLAS CHAPA, PAPEL,
CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5SCPara papel, cartón corrugado y fibras pesadasUSADA - MUY BUENAS CONDICIONES
Motor Baldor 2HP, 3/60/205-230/460V
AMXmachinery
SIERRA RADIAL MANUAL
PARTE # 2EV-0700 - SIERRA RADIAL - MANUAL - EVANS 0700Miter Saw, Manual Feed- 220 Volt, 3 Ph, 3 HP- Standard Features:- 16" Saw blade 1" arbor- Set up for 90, 45, and 22 ½ degree cuts- Pneumatically operated Saw Guard- Double V belt Drive on arbor.- Swing out supports for longer lengths- 60" X 96" working surface- 4" dust outlet on back of dust hood- 35 1/2 " working height. Adjustable leveling feet.- 50" stroke- Crated weight 1540 LBS. Shipping dimensions 104" long X 90" wide X 68" high
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - STANDARD-S - CAP. 168” X 66” X 3-1/8”
PARTE: 2ST-STANDARD-S - SIERRA
ESCUADRADORA VERTICAL - STANDARD-S - CAP. 169” X 66” X 3-1/8”
NUEVA CON GARANTIA• Swiss made quality for accuracy and
durability!• Very stable, all welded steel frame suitable
for free-standing or wall-mount installation• Heavy-duty panel support rollers with
integral foot pedal braking system• Convenient, sturdy, two-section mid-shelf
with moveable aluminum fingers allows comfortable working of small parts and ability
to stage material on...
AMXmachinery
ADAPTADOR RAPIDO CAMBIO BROCA - MAGGI
PARTE: 2MG-36000061 - ADAPTADOR RAPIDO CAMBIO BROCA - MAGGINUEVO CON GARANTIA