Identificador: 1554
Abierta
Descripción
PARTE: 12322 - PUNZONADORA - 30 TONS
USADA - BUENAS CONDICIONES
Tonnage capacity: 30 tons
Maximum material thickness: 1/4" mild steel
Punching capacity: 1" dia. - 1/4" mild steel
3-1/2" dia. - 12 ga. mild steel
Sheet size: 18" x 30"
Throat depth: 22"
S.P.M. approx.: 165
EQUIPPED WITH: 1-1/4" Swing-A-Way punch holder
Electric foot switch
Pushbuttons for start - stop
Selector switch for nibble - single
Large assortment of punches & dies
1 HP 1140 RPM 208/230/460/3/60 motor
Weight approx. 3000 lb
Overall dimensions approx. 65" L-R x 60" F-B x 72" H
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12511 – PRENSA DOBLADORA DE LAMINA – HASTA CAL 14 – LONGITUD 3.05 M
PARTE: 12511 – PRENSA DOBLADORA DE LAMINA –
HASTA CAL 14 – LONGITUD 3.05 M
USADO BUENAS CONDICIONES
HIDRAULICA
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...
AMXmachinery
PARTE: 12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
PARTE:
12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
SIN
COMPACTADORA
USADO EN BUENAS CONDICIONESDESIGNED TO SHRED
CORRUGATED SHEETS AND BOXES, OVERSIZED FLAP CUTS AND DIE PRESS WASTE TO SMALL IRREGULAR PIECES...APPROXIMATELY 5" X 8" PIECES. BOTTOM DISCHARGE
OUTLET FEEDS SHREDDED MATERIALS INTO CHUTES BINS, COMPACTORS, OR PNEUMATIC
SCRAP HANDLING SYSTEMS. IT HAS THE CAPACITY TO HANDLE 300 POUNDS PER HOUR PER
HORSEPOWER WHEN HANDLING CORRUGATED BOARD MATERIALS.
AMXmachinery
PARTE: 2QM-R-RCGS - ENGOMADORAS 1 Y 2 LADOS - ANCHO 24", 48" Y 63"
PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 1 LADO – ANCHO 24” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 2 LADOS – ANCHO 24” -
1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-48-1.75 - ENGOMADORA - 1 LADO – ANCHO 48” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-48-1.75 - ENGOMADORA - 2 LADOS – ANCHO 48” -
1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-63-1.75 - ENGOMADORA - 1 LADO – ANCHO 63” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-63-1.75 - ENGOMADORA - 2...