Identificador: 1612
Abierta
.jpg)
Descripción
PARTE: 2TY-79F-8 - RACK PARA
PRENSA TABLEROS - 8 PIES LARGO
NUEVA CON GARANTIA
18 Prensas con altura de 3-1/2” y 40” abertura
Ajustador de las prensas manual
Diseñada para 50 paneles por día
(5) total gluing levels
Includes (18) 3 1/2″ High Jaw 40″ opening clamps (52″ Clamps Available on Request)
Innovative, Space Saving Feature that allows the Clamps to be hung Vertically when not in use
Versatility to Edge Glue Hundreds of Woodworking Components
100% steel tubular construction that Creates a Flat and Even Work Area for Clamping Panels
Accessories: #302-40-H-R Clamps, 138B, 150B Glue Spreaders, 180A, 79-16 Hold Downs, 80-1706 Rocker Plates
Machine Footprint: 100″L x 70″H x 48″W
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA CANTOS
PARTE # 2AM-150 - LIJADORA DE CANTOSMotor: 1.5 HP Direct DrivenVoltage:151: 115 or 208-240/1/50-60152: 208-240/1 or 3/50-60154: 460/3/50-60Variable Speed: AC Inverter 400-1800 rpmArbor: 1” Dia. by 4” TallVertical Adjustment: YESHorizontal Adjustment: NONEWheel Tilt: NONEFence: OptionalTable Height: 36 inchesTable Size: 27” by 25”Floor Space: 27” by 25”Weight: 275 lbs.
AMXmachinery
DESCORTEZADOR 27"
PARTE # 2SE-DR5-27 - DESCORTEZADORA - 27" CAPACIDADMaximum Log Diameter Barked 25”Minimum Log Length 9’Number of Debarking Tools 5Width of Debarking Tools 4”Maximum Ring Speed 133 rpmMinimum Horsepower to Operate Ring 60Maximum Log Feed Speed 221 fpmLog Feed with 15% Tool Overlap 188 fpmHydraulic Pumping Unit 10 hpAir Pressure Required 90 -100 psiMachine Weight 35,000 pounds
AMXmachinery
TORNO COPIADOR - REGULAR - GENARI
PARTE: 12290 - TORNO COPIADOR - REGULAR - GENARI
USADO - BUENAS CONDICIONES
MOTOR 5 HP, 220v, 3 FASES
DISTANCIA ENTRE PUNTOS: 1.20 METROS
AMXmachinery
T-EDGE APPLICATOR
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high