Identificador: 904
Abierta
Descripción
PARTE # 11809 – REASERRADORA – 1 CINTA – BAKER ABX
Like new condition
- 30 HP motor
- 12 x 12 inches capacity
- Return and hydraulic hold down
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
SIERRA MULTIPLE - INVICTA DELTA
PARTE:
11917 – SIERRA MULTIPLE - INVICTA DELTA
USADA – BUENAS CONDICIONES
Motor 220/380V
AMXmachinery
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz.17 kw (no air required) Standard work height 37”.Standard Features:90 and 180 degree setupQuick-change 90 and 180 degree roller assembles each side.Maximum material width 48"Heaters: Infrared radiant panel (instant on / off)Foot print: 107”L X 72”W X 44”H, Work height 37”Maximum Feed rate 10 feet per minute.Feed motor: ½ hp variable speed DC drive.Crated weight 2400 LBS. Shi...
AMXmachinery
PARTE: 1SL-DC-CH30 - TALADRO DE COLUMNA - MOTOR 2 HP, 220V, 2 FASES
PARTE: 1SL-DC-CH30 - TALADRO DE COLUMNA - MOTOR 2 HP,
220V, 2 FASESMOTOR: 2 HP, 110/220V, 60 Hz, 1 FASE12 VELOCIDADES: 180 - 2940 RPMCHUCK: 5 A 20 MM (3/4")DISTANCIA DEL CHUCK A COLUMNA: 255 MMCARRERA CHUCK: 120 MMDISTANCIA DEL CHUCK A LA MESA: 660 MMDISTANCIA DEL CHUCK A LA BASE: 1100 MMDIMENSIONES DE LA MESA: 470 X 415 MMDIMENSIONES TOTALES: 1430 X 670 X 330 MMPESO: 138 KGSEMPAQUE: 1 CAJA* INCLUYE PRENSA DE 6"