Identificador: 2800
Abierta
Descripción
PARTE: P-BASE-520-G - RELOJ RECTO - CON RELOJ 3" - MADERA SOLIDA - COLOR CAOBA
Madera solida de pino
Reloj de 3" diametro (bateria no incluida)
Medidas:
6" ancho x 8.5" alto x 2" espesor
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz.17 kw (no air required) Standard work height 37”.Standard Features:90 and 180 degree setupQuick-change 90 and 180 degree roller assembles each side.Maximum material width 48"Heaters: Infrared radiant panel (instant on / off)Foot print: 107”L X 72”W X 44”H, Work height 37”Maximum Feed rate 10 feet per minute.Feed motor: ½ hp variable speed DC drive.Crated weight 2400 LBS. Shi...
AMXmachinery
REASERRADORA 1 CINTA BAKER
PARTE # 11809 – REASERRADORA – 1 CINTA – BAKER ABXLike new condition- 30 HP motor- 12 x 12 inches capacity- Return and hydraulic hold down
AMXmachinery
PARTE: 11787 – LIJADORA DE CEPILLOS Y DISCOS - TIMESAVERS
PARTE: 11787 – LIJADORA DE CEPILLOS Y DISCOS - TIMESAVERSEn buenas condicionesModelo: 337-6RPRotary polisher has six (6) 1/2HP counter-rotating arbors with fladder-style abrasives.Rotation 12-35 RPM, 2HP variable feed 15-45 FPM on conveyor belt with vacuum bed. (Less vacuum pump unit).36” width capacity. Each arbor/spindle is 12”-long x 2”-diameter, arbor speed 100-1200 RPM, with LED readout on RPM. 0” – 6” motorized part thickness opening.Infeed and outfeed pinch rolls.Wired 460V...
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE
PARTE
# 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored