Identificador: 1027
Abierta
Descripción
PARTE: 2FA-2NX-48 – RESACADORA DOBLE – 48” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 4,000 RESAQUES/HR
Standard Features
Adjustable Notch up to 3"
Variable Speed
Almost Unlimited Capacity
Machine Specs
Dimensions
Length: Model Dimensions 24"
Width: 73"
Height: 56"
Infeed Height: 40"
Power
Cutter Head Motors: 20HP 208/230/480/3/60 TEFC
Infeed Motor:1-1/2 HP 208/230/480/3/60 TEFC
VFD: For lnfeed Motor Variable Speed
Completely Pre-Wired Motor Starter with Start/Stop Buttons and Circuit Overload Protection
Specifications
Cutter Heads: 12" dia x 9" wide
Adjustable Cutter Head Position: Adjust Length of Cut with the Tum of a Handle
2" Arbor & Bearings
Capacities
Material Length: 36" to Model Dimension
Material Width: 8"(Standard)
Material Height: 2-1/2" to 4"(Standard)
Infeed Speed: 0-44 FPM
Up to 4000 Stringers Per Hour
Models
48" Length Capacity Model
72" Length Capacity Model
96" Length Capacity Model
120" Length Capacity Model
144" Length Capacity Model
168" Length Capacity Model
192" Length Capacity Model
Options
Machine Options
Automatic Inline Infeed
Waste Conveyors
Capacity Options
Pallet Fixture(run assembled 2-way pallets)
System Add-On Options
Infeed Chain/Conveyor
Outfeed Chain/Conveyor
Stacking Racks
Sorting Table
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12650 - CEPILLO - 4 CARAS - 24” ANCHO - PINHEIRO
PARTE:
12650 - CEPILLO - 4 CARAS - 24” ANCHO -
PINHEIRO
Usado – Muy buenas condiciones
24" max. planing width
20" max. moulding width
3" min. moulding width
8" max. thickness capacity
16" min. length workpiece unbutted, 9" butt fed
7.5 HP top head
5.5 HP bottom head
side heads are 17.5 HP each
4 HP variable speed feed 20 to 100 FPM
Top and bottom heads are 4-knife straight knife cutter heads
Side heads are 5" dia. X 8" long 4-knife corrugated bac...
AMXmachinery
LIJADORA DE 8 RODILLOS - QUICKWOOD
PARTE: 12299 - LIJADORA DE 8 RODILLOS
- QUICKWOOD
USADA -
BUENAS CONDICIONES
Technical
Specifications:
Throughfeed:
2-12 m/min.
(8)
spindles
300-1150
RPM spindle speed
3-16 RPM
rotation speed
540mm
spindle length
(6) dust
collection ducts 2100kg
Dimensions 2240 x 2630 x 2050 mm
AMXmachinery
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
USADO
- MUY BUENAS CONDICIONESWEINIG GRECONMOD. PROFI JOINT- min/max length of raw
material 150-700 mm- min/max working
thickness 20– 50 mm- min/max working width
35 - 170 mm- min/max final working
length 2250 mm - 4500 mm- type Cola Pvac - Complete with 1 knife
set- Volt. 400/50- year 2012- reconditioned by
Weinig Service in 2022
- CE RULES
AMXmachinery
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 14” DIAMETRO - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS
DE 14” DIAMETRO - PISTORIUS EMN-14
Usada - Excelentes condiciones - Solo se uso para hacer muestras
2 Motors 2 HP, 208/230/460 Volts, 60 Hz, 3450 RPM
2 Arrancadores Termomagneticos nuevos WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guia izquierda: 37” largo
Guia derecha: 22” largo
Pneumatic peda...