ID: 961
Open
Description
PARTE: 2NC-NT750-10 - ROUTER DE PEDESTAL – 10 HP – GARGANTA 29-1/2”
Nuevo con garantía
10 HP spindle drive motor
Chuck to tabletop maximum: 7-1/2"
Throat clearance: 750mm (29-1/2'')
2 Speed Spindle: 8,100 / 16,300 RPM
Spindle travel: 95mm (3-3/4)
Depth stops: 6 position turret stops, adjustable
Table travel: 190mm (7-1/2'')
Table surface area: 915mm x 101mm (36" x 40")
Table tilt: 45 degree front downward tilt
Micrometric table raise: 1/32" (1mm) per full revolution of hand wheel
35 x 2330mm (1-3/8" x 92") flat belt
Dust port size: (1) 3" requiring 350 CFM at point of extraction
Net weight / Gross weight: 1465 lbs / 1650 lbs
Packing dimensions: (L) 66" x (W) 44" x (H) 71"
(1) Tool box
Warranty is one year parts
All machines are tested stateside prior to shipment providing trouble free start up.
Machine Hp. = 10 hp.
Voltage/ Freq. = 230 Volt 60Hz
Phase = 3 Phase
Amp Requirement = 26 Amps
Configuration = 1/4'' 3/8'' 1/2'' Collet
Spindle RPM = 8100 / 16300 RPM
Elevation Style = Manual Wheel Adjustment
Elevation Sys. = Jack Screw / Linear Guides
Total Hp. = 10 Hp.
Electronics = CE Approved Components
Control Voltage = 230 Volt
Throat Capacity = 29-1/2''
Min. Thickness = 1-1/2'' Collet to Table
Max. Thickness = 7-1/2'' Collet to Table
Vertical Travel = 7-1/2''
Dust Collection = (1) 3'' @ 245 CFM
Dust Port Out = 3''
Emergency Stop = Push Button
Guarding = High Visibility Guarding
Operation Style = Pneumatic Foot Pedal
Fence Type = Adjustable Fence
Fence Dims. = 2-1/2'' x 40''
Tiltable = 45 Degrees
Frame Const. = 3/8 Steel Construction
Worktable Dims. = 39-3/4'' x 35-1/2''
Table Const. = Machined Steel
Decible Rating = 73 Db
Net Weight = 1462 Lbs.
Gross Weight = 1647 lbs.
Machine Dims. = 40'' x 62'' x 64''
Packaging Dims = 44'' x 66'' x 71''
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 10 HP - NEDERMAN
PARTE:
12265 - EXTRACTOR DE TURBINA - MOTOR 10 HP - NEDERMAN
USADO - MUY BUENAS CONDICIONES
PARA EXTRACCION DE ASERRIN O PARTICULAS3500 RPM
MOTOR 10 HP, 230/440V, 3 FASESCONECTADO ACTUALMENTE A 220V
HECHO EN USAMARCA NEDERMAN
MFG 2018
ENTRADA REDONDA 16” DIAMETRO
SALIDA CUADRADA 10” X 14”SE ENVIA EN TARIMA DE MADERA
AMXmachinery
BRIQUETEADORA – MOTOR 7.5 HP – DIAMETRO 50 MM (1.96”)
PARTE: 2CA-BP-100 – BRIQUETEADORA –
MOTOR 7.5 HP – DIAMETRO 50 MM (1.96”)Use sawdust, wood, paper, grass, leaves, all kinds of chips to make the briquettes.• Cost saving management of waste material reduces the volume of waste to be handled or shipped.• Effectively helps with compliance of local regulations mandating reduction of solid waste.• Converts waste into a valuable heating source for colder climates.• Increases profitability by converting waste into a marketable produc...
AMXmachinery
ASTILLADORA ESTACIONARIA – 30 HP – WEIMA
PARTE: 12271 – ASTILLADORA ESTACIONARIA – 30 HP –
WEIMA
USADA – MUY BUENAS CONDICIONES
Rotor Dia.: 9.9″
Rotor Width: 31.5″
Rotor Speed: 60-100 RPM
Motor: 30 HP
Screen : 10-40mm
Model: WL6
AMXmachinery
MOLDURADORA 5 CABEZALES
PARTE # 12WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALESMOLDURADORA AUTOMATICA5 CABEZALESCARACTERISTICAS GENERALES:KW (HP) rpm Tool cutting circle1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“3 - Joint Motor together with Right 6000 5“ – 7-7/8“4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“ Tool arrangement BRLTBWorking width 3/4“ – 9“Working height 5/16...