Identificador: 1139
Abierta
Descripción
PARTE # SIL-DC-SC10-B - SIERRA CINTA DE 10" - MOTOR 1/2 HP
NUEVA CON GARANTIA
MOTOR: 1/2 HP, 110V, 60 Hz, 1 FASE
DISTANCIA DE CINTA A COLUMNA: 230 MM
ALTURA MAXIMA DE CORTE: 80 MM
TAMANO DE LA MESA: 290 X 290 MM
INCLINACION DE LA MESA: 0 - 45 GRADOS
LONGITUD DE LA SIERRA CINTA: 1511 MM
ANCHO DE LA SIERRA CINTA: 9.8 MM
PESO: 16 KGS
EMPAQUE: 1 CAJA
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2GB-FJ-00160 - CUCHILLAS FINGER JOINT
PARTE: 2GB-FJ-00160 - CUCHILLAS FINGER JOINTCuchillas de 2 alasMedidas: 160X4.0X50-2TMedidas: 160mm diametro exterior x 4mm espesor x 50mm diametro interiorPuntas de Carburo de Tusgteno2GB-FJ-00160-1 CUCHILLAS ENMEDIO - 2 ALAS2GB-FJ-00160-2 CUCHILLAS ESQUINAS - 2 ALAS
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-72550 - LIJADORA DE 1 TAMBORES - 25”- 50” DE ANCHOSPECIFICATIONSSanding Capacity:Maximum Width (in): 50 (two passes)Minimum Length (in): 2-1/4Maximum Thickness (in): 4Minimum Thickness (in): 1/32Dimensions (in):46L x 27W x 53H (on stand)Drum:5 x 25 extruded aluminumDrum Speed:1740 RPMDust Hood:1- 4″ vacuum port, min. 600 CFM recommendedConveyor Motor:43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPMDrive Motor (TEFC):1-3/4 HPPower Requirements110 V 20 ampShi...
AMXmachinery
PARTE: 2MA-FP-5285 - LIJADORA - CALIBRADORA DE METAL - 52" ANCHO - 1 LIJA
PARTE: 2MA-FP-5285 - LIJADORA - CALIBRADORA DE METAL - 52" ANCHO - 1 LIJANUEVA CON GARANTIASpecifications:
Model
FP-2560 FP-4075 FP-5285Sanding
Capacity 24”
x 6-1/8” 40” x 6-1/8” 51” x 3-1/...
AMXmachinery
PARTE: 2EB-DK2 - ASTILLADOR A GASOLINA – 14 HP – MAX DIAMETRO 6.25”
PARTE:
2EB-DK2 - ASTILLADOR A GASOLINA – 14 HP – MAX DIAMETRO 6.25”
NUEVA CON GARANTIAFeatures
dual swing chutes, 13-inch cutting blades, DOT road-legal tires, and a 36-inch
extended axle. The load chute is pickup truck height and the engine is covered
by a Commercial Command Pro 3-Year Kohler warranty.The
14 HP Kohler Commercial engine has an RPM of 3,600, and the dual 13-inch
cutting blades auto-adjust to pulverize brush and up to 6.25-inch diameter
trees. For increased longevi...