Identificador: 1587
Abierta
ID de articulo : # 1587 se ha agregado a su lista de deseos.
Descripción
PARTE: 12340 - COMPRESOR DE TORNILLO - 30 HP
USADO - MUY BUENAS CONDICIONES
CoAire CHSA-30
230/440V, 60 Cy, 3 Phase
Main Motor: 30 HP
Discharge Pressure: 150 PSI
Air Delivery: 100 CFM
Compressor Speed: 3050 RPM
Ambient Temperature: 32 Deg. - 115 Def. F
Driving Method: V-Belt (3VX4)
Oil Sump Capacity: 5 Gallons
Dimensions: 55-1/2" L x 40-3/8" W x 48-1/2" H
Weight: 1232
Filters have been replaced, its been flushed out and has new oil.
The last hours recorded on the inside panel are 35,147, they may have gone up since it was serviced last
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
ASTILLADORA 7"
PARTE: 2WA-CR70 – ASTILLADORA – MOTOR GASOLINA 38 HP, CAPACIDAD 7” DIAMETRO7" x 12" Slab Style OpeningAuto Engage Fluid CouplerDual Active RollersIntellifeedKohler Gas EngineRotor DiscAngled RotorLedger AdjustmentRapid Recovery Auto ReverseEasy Start Tension ReliefSafety / Control Bar360° Swivel Exit ChuteEasily Accessible Rotor HoodRotor Lockout Safety LeverDouble Banded V-BeltsHighway TiresElectric BrakesTorflex Suspension AxlesSignal LightsLockable Fuel / Storage CompartmentEnclosed Fu...
AMXmachinery
CRISTAL COLUMNA - RECTANGULO
PARTE: P-VIDRIO-1003C - CRISTAL COLUMNA - RECTANGULO - BISELADO - CON BASE DE MADERACristal ¼ espesorBase de Madera Terminada Medidas: 6 x 8"
AMXmachinery
ASTILLADOR DIESEL 22 HP
PARTE: 2EB-WP-22HP-D-SDS – ASTILLADOR DIESEL – 22 HP – MAX DIAMETRO 8”NUEVA CON GARANTIAPower: 22 HPEngine Make: Changchai 22HP Single Cylinder Diesel Engine w/ Electric Start Battery includedChipping Capacity: 8" DiameterFeeding System: Hydraulic Feed (Forward / Neutral / Reverse)Rotor Plate Size: 640mm (25.2")Rotor Plate Weight: 180 LbsBlade System: 1 Fixed Anvil Blade 2 Moving BladesOverall size: 136" L x 82" H x 60" WCrate Box Dimensions: 67" x 44" x 44"Feed Opening Size: 7.875" ...
AMXmachinery
SIERRA VERTICAL ELCON CON NAVAJA
PARTE: 4EL-LANCET - SIERRA VERTICAL - CON NAVAJA - ELCONHow to improve/speed up the processing of multiwall polycarbonate sheets?By using a static knife instead of a sawblade. This reduces the amount of time spent on cleaning out the channels. The static knife delivers precise and clean cuts, without chips. Thus reducing wasting time on the post-processing. Some of the companies owning a Lancet reported up to 75% time saved.The Elcon Lancet is another #custombuilt solution that very few people...