Identificador: 1175
Abierta
Descripción
PARTE: HA250W – SIERRA CINTA – AUTOMATICA – CAPACIDAD 10” - AMADA
NUEVA CON GARANTIA
Machine Specifications
Cutting Capacity
Round (Diameter) 1.18"-10"
Rectangle (W x H) 11.8" x 10"
Work Load Capacity 3,307 lbs.
Material Index Stroke 15.75" (Maximum 9 Times Index)
Index Length 0.394" x 141.7"
Saw Blade Dimensions (L x T x W) 11'6" x 0.042" x 1-1/4"
Blade Speed 89-295 ft./min, 60 Hz, Stepless
Saw Blade Motor 5 HP
Hydraulic Pump Motor 1 HP
Cutting Fluid Pump Motor 0.25 HP
Voltage Required
AC220V±10%, 3 PH, 60 Hz
Or AC440V, 3PH, 60Hz
Machine Dimensions
Head Up Position 76.5" x 93.1" x 69.8" (W x L x H)
Head Down Position 76.5" x 93.1" x 50.6" (W x L x H)
Table Height 27.6"
Machine Weight 3,307 lbs.
HA250W - Model - HA250W with Machine Standard Features
Blade - SVGLB 1 1/4" x 0.042" x 4/6 TPI x 11´6" (start-up blade)
OPTIONAL ITEMS
6' Dead Roller Table Free Standing
10´ Dead Roller Table free standing
Vertical clamps
Vise Pressure Control
Extended warranty - additional year in parts
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO - MOTOR 1/3 HP
PARTE: AMX-10128 - EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO
- MOTOR 1/3 HP
USADO - BUENAS CONDICIONES
MOTOR 1/3 HP, 280/440V, 3 FASES
MEDIDAS: 14” DIAMETRO INTERIOR X 16”
DIAMETRO EXTERIOR X 14” FONDO
4,500.00 MXN
AMXmachinery
CABEZAL 2 HP
PARTE: 1SL-PS-20 - CABEZAL PARA COMPRESOR – 8.2 CFM - 2 HPNuevo con garantíaDesplazamiento de 8.2 CFMPresión máxima de 115 PSI2 Cilindros de 51 mmPeso: 22.5 kgsEmpaque: 365x320x315 mm
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
ALIMENTADORA PANELES
PARTE # 2EV-8100 – STANDARD PANEL FEEDER – EVANS 8100Hydraulic 4 Corner Cable LiftTouch Screen ControlsLaser Height SensorNEMA 12 Enclosure460 Volt Fused Disconnect5 HP Hydraulic Power PackPanel Size: up to 5’x10’Panel Thickness: 3/8” to 1-1/2”Lift Capacity: 7000 poundsElectrical: 230/460 V, 3 PH, 60 Hz, 480 volt, 3 phase, 60 hzOptions:- Upgrade for 5’ x 10’ or 5’ x 12’ materials and increase lift capacity to 8000 pounds. (option 8200)- Upgrade for remote hand pendant control...