ID: 319
Open
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
PARTE # 2AZ-D45AX - SIERRA DOBLE 45 GRADOS - SIERRAS 12" DIAM
PARTE # 2AZ-D45AX14 - SIERRA DOBLE 45 GRADOS - SIERRAS 14"DIAM
Fixed Head Double Mitre Saw
Blade Capacity: 12" (14" available)
2 H.P. 1 or 3 phase
Magnetic Starter
3450 RPM
Cutting Capacity:
12": 4" X 2.375"
14": 4" X 2.5" or 2"X 6”
Blade Capacity
10" OD 254mm Saw blades not included.
12" OD 305mm optional.
14" OD 356mm optional.
Spindle & Pivot
Both mounted on pre-loaded and sealed ball bearings.
Arbor
5/8" 16mm with 2-1/4" 57mm saw collars.
Iron Castings
Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.
Motors & Voltages
1-1/2 H.P. single phase 115/230 Volt and 3 phase 230/460 Volt, Totally Enclosed Fan Cooled Motors, 60 Hz, 3450 RPM with Dual Magnetic Starter. Consult factory for amerage load of motors.
Table Height
34-1/2" 88cm from floor.
Floor Stand
Close coupled heavy gage steel stand completely enclosed with 6" dust outlet. 1200 CFM required.
Blade Wear & Angular Adjustments
Each saw head has adjustments for blade variation. Allows for precision alignment of blades to minimize scrap. Saw heads are adjustable up to 3°, always assuring perfect mitres.
Length of Stroke Adjustment
The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, thereby saving wasted time and motion.
Production Rate
The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
Size
Standard machine, without tables or gages; Weight 550 lbs. 250kg; 46" 117cm Wide x 22" 56cm front to back x 51-1/2" 131cm High.
Crated Size
45" 114cm Wide x 28 -1/2" 72cm front to back x 60" 152cm High.
Actuation
Pneumatic foot valve with cover.
Air Pressure
75 PSI 5.4 kg/cm2 with Air Filter/Regulator/ Lubricator; includes Auto Drain.
Air Consumption
1.0 CF per 10 strokes at 75 PSI .043 cubic meters per minute at 5.4 kg/cm2.
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery
MESA PARA TRANSFERIR TABLEROS ENTRE ESPIGADORAS DOBLES DE CADENA
PARTE: 2TA-SET-TRANS –
MESA PARA TRANSFERIR TABLEROS ENTRE ESPIGADORAS DOBLES DE CADENA
Nueva
con garantíaDiseñada
a la medida para transferir material continuamente entre 2 espigadoras dobles
de cadenaTableros,
puertas, etc.
Aumenta
la eficiencia y disminuye o elimina los manejos manuales
Video: https://vimeo.com/639803360
AMXmachinery
COMPACTADORA DE CARTON – HORZONTAL – 20 HP
PARTE:
12353 – COMPACTADORA DE CARTON – HORZONTAL – 20 HP
USADO EN BUENAS CONDICIONESHas an
extra large feeder hopper that can be adapted to gravity, pneumatic or belt
conveyor automatic feed devices.Fully
automatic baling cycle with start-compress-and-stop action, requiring only a
part-time operator to tie-off bale and open ejector door. Bale automatically
gets ejected as new bale is being formed. Saves space and money.
550v, 3
phase, 60hz, 46 Amp
AMXmachinery
PARTE: 12589 – LINEA DE PINTURA – MOLDURAS – RENZO BORGONOVO
PARTE: 12589 – LINEA DE PINTURA – MOLDURAS – RENZO BORGONOVOUSADA - MUY BIENAS CONDICIONES - REVISADAModelo: SP 6PPara partes lineales como molduras, pisos, tiras de madera, etc.Can be used with water-based paints, thinners, nitro and polyurethane paints, paints containing pigments, acrylic paints, matt and gloss paints. The machine features 4 spray stations comprising each of up to 2 automatic spray-guns, a tray collection and a duct for direct product recovery. The machine is operated ...
AMXmachinery
PARTE: 2MT-CM15 – CORTA Y AGUJERA ESQUINAS – PARA LAMINA RECONOCIMIENTOS
PARTE: 2MT-CM15 – CORTA Y AGUJERA ESQUINAS – PARA LAMINA RECONOCIMIENTOSNueva con garantia6 combinaciones:Esquina NotchEsquina RedondaAgujeros EsquinasAgujeros CentradosCombinacion agujero y notchCombinacion agujero y redonda Peso: 4 kgDimensiones: 17.25 × 11.25 × 6 pulgadasDiámetro agujero: 1/8 y 3/32 El trabajo se hace en 1 solo pasoCortes rapidos, limpios y sin rebabasRadio adjustableRapida y facil de usarPrecision en cortes repetitivos