Identificador: 1776
Abierta
.jpg)
Descripción
PARTE: 2CK-P305 - SIERRA ESCUADRADORA - 3200 MM
Is built for the budget conscious user that still wants precision and accuracy. The machine has a precision sliding table which runs on ball bearings and hardened steel guide strips. It is equipped with individual motors for the main saw blade (5 HP) and scoring blade (1 HP). The blade height and tilt is manually adjusted by means of individual handwheels. The angle of the blade is displayed by a linear scale for added operator convenience. The rip fence runs on a round hardened rail and is manually adjusted up to 51”. Equipped with a extendable crosscut miter fence and flip stops.
- Precision anodized aluminum sliding table with ball bearing guide system for smooth table movement
- Powerful 5 HP main motor with 1 HP scoring motor
- Heavy duty cast-iron rip fence with 51” cutting capacity
- Aluminum crosscut miter fence with (2) flip stops and dual inch/metric scales
- Manual rise/fall the main saw blade
- Manual tilting of the saw blades with angle indicator conveniently located by adjustment handwheel
- Overarm blade guard with build in dust port
KEY ADVANTAGES
- Solid cast iron main table which is ground and polished
- Heavy-duty outrigger for strong support of workpiece during cutting operations
- Solid rip fence with manual fine adjustment and locking lever
- Easy to access external scoring adjustment
- Convenient eccentric manual scoring adjustment
- Extension table at side and back of main table
- Equipped with set of main and scoring blades
- Included: Eccentric hold down clamp & wedge for solid wood ripping included
|
|
Inch |
Metric |
|
Cast iron fixed table dimension |
59″ x 68″ |
1500 x 1726mm |
|
Sliding table dimension |
126” x 14″ |
3200 x 360mm |
|
Max. main saw blade diameter |
12” |
305 mm |
|
Main saw bore |
30mm |
|
|
Max. cutting height with blade at 90o |
3.54” |
90 mm |
|
Max. cutting height with blade at 45o |
2.48” |
63 mm |
|
Main motor power |
5 HP |
|
|
Main blade speed |
4000 RPM |
|
|
Scoring saw blade |
120 mm |
|
|
Scoring saw blade bore |
20 mm |
|
|
Scoring blade motor power |
1 HP |
|
|
Scoring blade speed |
8000 RPM |
|
|
Blade tilt |
0 – 45o |
|
|
Max. ripping width |
51” |
1300mm |
|
Dust collection ports |
(1) 4” / (1) 2.3” |
(1) 100mm / (1) 60mm |
|
Machine weight |
1206 lbs. |
548 kgs |
|
Sliding table weight |
176 lbs. |
80 kgs |
|
Electrics |
230/1/60 = 36 Full Load Amps |
|
|
230/3/60 = 19.4 Full Load Amps |
||
|
575/3/60 = 8 Full Load Amps |
||
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpeg)
AMXmachinery1
MOLDURADORA DE 4 LADOS
PARTE: 3RE-M23U - MOLDURADORA DE 4 LADOSProfessional solution: solid wood or MDF and HDF furniture, wooden door and so onCharacteristic1.Inverter feed speed of 6~30m/min2.Individual motor to each spindle to ensure maximum power transmission3.High precision spindle units with two pairs of high precision bearings each end of the assembly4.All main spindle adjustments are carried out from outside the enclosure5.Hard chromed bed plates to minimise bed wear6.Short piece driven top feed roller unit fo...
-500x500.png)
AMXmachinery1
TRANSPORTADOR DE RETORNO
PARTE: 2DO-BT3 - TRANSPORTADOR DE RETORNO1 Edge bander + 1 Return Conveyor = 1 fully productive operator, a
streamlined workflow, less handling damage, less rejects… Unlike their human counterpart, an automated
system needs no hiring, no training, does not take off sick and works extended
hours without receiving extra money. This is true for all Return Conveyors
installed on shaper/sanders, single end tenoners, planers and wide belt
sanders.Operating Principle: Its receiving rollers ar...
-500x500.png)
AMXmachinery1
CANTEADORA DE CANTOS - 29 FPM - 0.4 - 3 MM
PARTE: 2CK-MX340 - CANTEADORA DE CANTOS - 29 FPM - 0.4 - 3 MMCapable of applying up to 3mm thick edge tape on cabinet parts and more. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. It’s compact design and affordable price point make it the ideal edge banding solution for the small cabinet shop who does not require pre-milling.Versatile edgebander capable of applying 0.4mm to ...
AMXmachinery1
PRENSA HIDRAULICA PARA PEGAR
PARTE: 4ST-SL1 - PRENSA HIDRAULICA PARA PEGARHYDRAULIC PRESS FOR LAMINATED BEAMSCLASSICS FOR GLUINGIs a hydraulic press for the production of non-structural laminated beams.Its solid structure combined with its ease of setup and use make it the optimal solutionfor the production of laminated beams and blockboard panels.The working unit consists of cylinders and pressers equipped with a distributor with 2 control levers and sliding front pressers.Wide range of configuration options to suit your w...