Identificador: 1768
Abierta
ID de articulo : # 1768 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-SU/SB
Is designed for in-line or stand-alone operations. Suitable for double-sided processing solid wood or sealer sanding applications is built to exacting standards to sand multiple surfaces generally in one pass to achieve outstanding results with maximum efficiency. Is available with multiple configurations with 1-4 sanding units and widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (drum/platen), or wire brush heads for distressing. In addition, the machine can be configured with a spiral insert knife cutter head for a planer sander combination.
- Constant pass line allows for in-line integration to a sanding or finishing line or for use with conveyor systems.
- Double-sided processing greatly reduces the processing times and increases productivity.
- Heavy-duty machine frames and sanding units for optimum sanding results.
- Wide range of configurations available to suit your production needs.
- User-friendly controls for fast setups and changeovers between various jobs and sanding grits.
- Variable feed speed by frequency inverter for optimum stock removal to finish ratio.
- Heavy-duty pressure shoes with hard chrome plating for superior part hold down.
KEY ADVANTAGES
- Electronic belt tracking.
- Disc brakes for the sanding heads.
- High-quality conveyor belt with superior grip and durability.
- Quick-release outboard supports for fast belt changes.
- Panel cleaning brush with built-in dust port.
- Safety interlock switches on access doors.
- Pneumatic disc brakes for stopping the sanding heads.
- Safety doors for emergency stop (two doors for SU, one door for SB).
- Electrics with CSA or UL components. Main disconnect switch to CSA.
|
|
INCH |
METRIC |
|
Working widths available |
24” / 36” / 43” / 51” |
610 / 915 / 1100 / 1300mm |
|
Number of sanding units |
1 to 4 |
1 to 4 |
|
Material thickness capacity (standard) |
0.118” ~ 4.9” |
3~125mm |
|
Sanding belt length available |
75” / 103” |
1905 / 2620mm |
|
Pass-line height (standard) |
35.4” |
900mm |
|
Feed speed |
50 up to 130 FPM |
15 up to 40 m/min |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
LIJADORA CALIBRADORA 43" - BANDA ANCHA - 1 LIJA
PARTE: 2SS- WBS4375101 - LIJADORA CALIBRADORA 43" - BANDA ANCHA - 1 LIJAOffering woodworkers a maximum sanding width 43″, and available in single or three phase power, this American Made Wide Belt Sander will likely outlive you.Main Motor Options10 Hp, Single Phase (1~), 220 Volt 20 Hp, 3 Phase (3~), 208 Volt / 230 Volt 460 Volt, 3 Phase (3~), 20 HpThe 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt trans...
AMXmachinery1
CEPILLO 2 CARAS - 40 PULGADAS
PARTE: 2CK-GTM120WHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head. This wide planer is ideal for increasing production on narrow boards and capable of planning live edge slabs...
AMXmachinery1
LIJADORA EN SERIE
PARTE: 2LA-5000 - LIJADORA EN SERIECan be configured to sand the top, bottom or sides of parts utilizing a chain driven roller feed system. It has a fixed height roller conveyor.fully customizable to suit shop needsdesigned with a small footprintideal for sanding long thick partsruggeddependable
-500x500.png)
AMXmachinery1
HORNO DE AIRE CALIENTE
PARTE: 12739 - HORNO DE AIRE CALIENTE Tested and works as it should.208V OnlyDrive bar roller styleConveyor is 69" Long