Identificador: 1605
Abierta
SIERRA ESCUADRADORA VERTICAL - STANDARD - CAP. 168” X 66” X 3-1/8”
AMXmachinery
Descripción
PARTE: 2ST-STANDARD - SIERRA ESCUADRADORA VERTICAL - STANDARD - CAP. 169” X 66” X 3-1/8”
NUEVA CON GARANTIA
• Swiss made quality for accuracy and durability!
• Very stable, all welded steel frame suitable for free-standing or wall-mount installation
• Heavy-duty panel support rollers with integral foot pedal braking system
• Convenient, sturdy, two-section mid-shelf with moveable aluminum fingers allows comfortable working of small parts and ability to stage material on one side of the saw
• Snap-in aluminum small parts supports (pair) for stability of small parts cutting on mid-shelf
• Automatic, mechanically shifting aluminum support grid with replaceable plastic laths
• Full length measuring channel with inches/metric scales and measuring flip stop
• Second measuring channel with one auxiliary 4” wide flip stop
• Vertical cutting stations 40 inches on center (1 meter optional)
• TRK dust collection system with cable chain hose take-up; note: requires connection to a collector
• 7-1/2 hp, 220/440V, 3-phase motor with brake, Y- soft starter, and insulation to 77dB
• 300 mm (11-7/8”) HFG (hollow face) carbide saw blade
• Main blade, climb-cut scoring for chip-free cutting of melamine, veneers, and laminates
• Template bar with six stops for setting typical horizontal cuts
• Repeat rip device with roller follower and 5’ capacity for strip cutting from top of panel
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
DESCORTEZADOR 40"
PART # 2NI-DE-R2 – DESCORTEZADOR – CAPACIDAD 40”- Slow speed, sliding ring design- Innovative 3 arm air cell type ring is simple in design and highly responsive in operation- Unique actuator/reservoir system allows setting of different tool pressure gradients when stopped- Excellent all round maintenance access- Chain bed style infeed and out feed- Hydraulic actuation for ring/infeed centering and out feed hold down rolls- Manual operator control standard, automation package is optional- H...
AMXmachinery
ENROLLADORA LAMINADOS
PARTE # 2EV-7100 - ENROLLADORA DE LAMINADOS - EVANS 7100 This machine not only rolls your laminate but it also helps you tape or tie the roll and, with our optional tilt takeaway conveyor (7110), gently lowers your heavy roll to the floor.This automated roller takes care to gently wrap the laminate into two different roll diameters for shipping. No more struggling to wrap by hand.This heavy duty machine plugs right into the wall with 110 power and require 90 psi of shop air to operate.110 Vol...
AMXmachinery
CNC DRILL GLUE INSERT DOWEL MACHINE HOMAG WEEKE ABD 100
PART: 12063E – CNC DRILLING AND DOWEL INSERTING MACHINE – HOMAG WEEKE ABD 100USED – VERY GOOD CONDITIONSYEAR: 2010Weeke’s model ABD 100 is designed for small and large capacity horizontal drilling, gluing, and dowel insertion. The ABD 100 is produced by skilled technicians with a long tradition for excellence in engineering and machine building.The Model ABD 100 is built on a heavy-duty base with welded steel construction. The main horizontal beam of the machine holds the carriage ...
AMXmachinery
CEPILLO MOLDURADOR 13" ANCHO
PARTE: 1SL-DC-WPM13 - CEPILLO MOLDURADOR 13" ANCHONUEVO CON GARANTIAMOTOR: 1.5 HP, 220V, 60 Hz, MONOFASICOTAMANO DE LA MESA: 18" X 14"CAPACIDAD DE CORTE: 13" X 6"MAX. PROFUNDIDAD DE CORTE: * 1/8" PARA TABLAS HASTA 5-1/2"13" * 1/16" PARA TABLAS MAYORES A 5-1/2"VELOCIDAD DE CABEZAL: 5000 RPMVELOCIDAD DE ALIMENTACION MOLDURADOR: 12 PIES/MINCAPACIDAD DE ANCHO EN MOLDURADOR: 2-1/2" A 6"DIMENSIONES MAQUINA: 44" ALTO X 24" ANCHO X 36" FONDOPESO: 120 KGSTIPO DE EMPAQUE: 2 CAJAS* L...