Identificador: 1605
Abierta
SIERRA ESCUADRADORA VERTICAL - STANDARD - CAP. 168” X 66” X 3-1/8”
AMXmachinery
Descripción
PARTE: 2ST-STANDARD - SIERRA ESCUADRADORA VERTICAL - STANDARD - CAP. 169” X 66” X 3-1/8”
NUEVA CON GARANTIA
• Swiss made quality for accuracy and durability!
• Very stable, all welded steel frame suitable for free-standing or wall-mount installation
• Heavy-duty panel support rollers with integral foot pedal braking system
• Convenient, sturdy, two-section mid-shelf with moveable aluminum fingers allows comfortable working of small parts and ability to stage material on one side of the saw
• Snap-in aluminum small parts supports (pair) for stability of small parts cutting on mid-shelf
• Automatic, mechanically shifting aluminum support grid with replaceable plastic laths
• Full length measuring channel with inches/metric scales and measuring flip stop
• Second measuring channel with one auxiliary 4” wide flip stop
• Vertical cutting stations 40 inches on center (1 meter optional)
• TRK dust collection system with cable chain hose take-up; note: requires connection to a collector
• 7-1/2 hp, 220/440V, 3-phase motor with brake, Y- soft starter, and insulation to 77dB
• 300 mm (11-7/8”) HFG (hollow face) carbide saw blade
• Main blade, climb-cut scoring for chip-free cutting of melamine, veneers, and laminates
• Template bar with six stops for setting typical horizontal cuts
• Repeat rip device with roller follower and 5’ capacity for strip cutting from top of panel
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SECADOR DE AIRE - PARA AIRE COMPRIMIDO
PARTE: 12342 - SECADOR DE AIRE - PARA AIRE COMPRIMIDO
USADO - BUENAS CONDICIONES
Actualmente esta en servicioSpecifications:460V,
3 Phase. 60 HzLow
Side Circut Design Pressure: 1,9 Mpa, 19 Barg, 276PsigHigh
Side Circut Design Pressure: 2,8 Mps, 28 Barg, 406 PsigMaximum
Air Input: 60 Degrees C (Low), 140 Degrees (High)Minimum
Ambient Temperature: 5 Degrees C (Low), 41 Degrees F (High)Maximum
Ambient Temperature: 50 Degrees C (Low), 122 Degrees F (high)Minimum
Circuit Ampacity: 5.0 AM...
AMXmachinery
SIERRA CINTA – VOLANTES 36” – 20 HP - CON ALIMENTADOR – STENNER
PARTE: 12227 – SIERRA CINTA – VOLANTES 36” – 20 HP - CON
ALIMENTADOR – STENNER
USADA – MUY BUENAS CONDICIONES
Wheel
Diameter: 36"
Max.
Bandsaw Width: 100mm
Maximum
Depth of Cut: 370mm
Saw
Motor: 20 HP, 230/460v, 3ph
Feed
Motor: 0.55 HP, 230/460v, 3ph
Feed
Speeds: 7.5, 15, 22.5, and 30 m/min (Need to Change Belt)
Table Size: 31" x 37"
AMXmachinery
PRENSA DE MEMBRANA – 1 MESA – 4 X 8 PIES
PARTE:
2LB-PT-VAC481 – PRENSA DE MEMBRANA – 1 MESA – 4 X 8 PIES
Nueva con garantíaFeatures:Special design for using heating
and vacuum pressure to add form or film skin to a shaped, curved or uneven
surface material. Also, it can perform as print heat transfer.Suitable for wood veneers or PVC
sheets.Automatic controlled by PLC for
suitable and easy operation.Double-layer and fully sealed
heat preservation.Advance heating temperature
digital control by computer for the best adjus...
AMXmachinery
PARTE: 1SL-DC-BR-8 - KIT DE 8 BROCAS PARA ROUTER
PARTE: 1SL-DC-BR-8 - KIT DE 8 BROCAS PARA ROUTERVASTAGO 1/4" (8MM)ESTUCHE DE MADERA CON 8 PIEZAS