Identificador: 2948
Abierta
.PNG)
Descripción
PARTE: 2PI -TSS - SIERRA PARA CORTE, RECORTE Y RANURADO
Was designed to cut materials that are susceptible to tear out as well as pack cutting of multiple parts at the same time.
- Tear-out FREE! Absolutely no tear-out on the cut boards
- Very safe operation for the user
- More accurate than a manual chop saw
- Frame is designed to sit flat or tilted at 10 degree angle
- TigerStop ready
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL
PARTE: 2PI-HP5D - ESPIGADORA HORIZONTALIs designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as cut a panel groove in the cen...
-500x500.jpg)
AMXmachinery1
SIERRA DE BANCO - 14 PULGADAS 10 HP
PARTE: 2CK-TA1214Is for serious woodworkers and production shops that require an industrial strength and powerful table saw. The large precision-ground & polished cast-iron table and cast-iron saw unit ensure vibration free cutting with optimum cut quality. The quick setting T-square rip fence is equipped with dual inch & metric scales for precise rip cutting. The blade guard is mounted to a splitter with anti-kickback pawls for safe operation. Comes standard with both standard and dado ar...
AMXmachinery1
SIERRA VERTICAL - 64" ALTO X 120" ANCHO
PARTE: 2SS-6400 - SIERRA VERTICAL - 64" ALTO X 120" ANCHOProvides a 64″ maximum crosscut. The maximum ripcut (horizontal) is dependent on pushing the panel through.Standard Equipment3 Hp worm driven heavy-duty saw motor.10 ft. welded steel frame.Chrome-plated 1 3/4″ guide tubes.8 Nylatron roller bearing systems.Adjustable vertical and horizontal rulers.Quick change from vertical to horizontal cutting.Thin material pressure guard.Solid aluminum material rollers.Enclosed counterweight system.I...
-500x500.png)
AMXmachinery1
SIERRA VERTICAL - 74" ALTO X 64" ANCHO
PARTE: 2SS-C5 - SIERRA VERTICAL - 74" ALTO X 64" ANCHOThe portable panel saw features a 64″ maximum crosscut and cuts material up to 1.75″ thick. Photos are shown with a stand and wheels, which are optional accessories.Motor Horsepower, Amperage and Volts3.25 HP, 15 amp, 120 Volt3.25 HP, 7.5 amp, 220 VoltStandard EquipmentZinc plated 1 ¾” steel guide tubes.Milwaukee Tool motor4 Nylatron roller bearing systems.Adjustable vertical and horizontal rulers.Quick change from vertical to horizo...