Identificador: 2344
Abierta
ID de articulo : # 2344 se ha agregado a su lista de deseos.
.PNG)
Descripción
MESA CORRIENTE DESCENDENTE - 1 HP * 2CL-FT2200
Is ergonomic, energy efficient, and easy to maintain. Rubber anti-slip rings and removable location stops ensure the material does not move during the sanding process, and the dual filters safely trap sawdust particles. Rear suction boards and side deflector plates are removable for sanding larger surface materials. Is perfect for light to medium duty woodworking applications such as sanding and finishing.
- 84” x 24” table surface
- Perfect solution for reducing airborne wood dust and eliminating time consuming cleanups
- Two powerful 1HP motors each generating 1950 CFM
- Panels can be latched in place or folded down to make room for larger workpieces.
- Dust is collected in two drawers that can be easily removed at the front of the machine
- Designed for industrial duty applications
- For maintaining a clean and dust-free shop environment
- Virtually eliminating wood dust from the air
- Two operators can stand side-by-side while they sand workpieces on the worktable
- Heavy duty cabinet design and sturdy components provide a strong, durable work surface and investment
- Draws the contaminants down and away from the worker’s breathing zone
- Special deflectors create an even airflow across the table surface
- Simple to use; plug and play design
Main motor | 2 x 1 HP | |
Air flow CFM | 1950 CFM x 2 | |
Table load capacity | 660 lbs | |
Cartridges | 2 | |
Filter | 5 micron / 4pcs 16″ x 2″ x 1” | |
Table size | 84 x 24” | |
Sound | 82 dB | |
Table height from floor | 29 ½ to 32” | |
Machine dimensions | 84” x 28 ½” x 36” | |
Machine weight | 375 lbs. | |
Shipping dimensions | 86″ x 30″ x 36″ | |
Shipping weight | 400 lbs. | |
Electrical requirements | 230/1/60 = 8 amps | 115/1/60 = 15 amps |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 12GA
DOBLADORA DE METAL 4' X 12GA PARTE: 2GM-0412EThis machine has a 2HP Motor, rated at 220V/440V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is powe...
AMXmachinery1
PARTE: 2CK-JDT75 - ENLAZADORA/COLA DE MILANO
PARTE: 2CK-JDT75 - ENLAZADORA/COLA DE MILANOThis fully automatic machine produces both the pin and tail of the dovetail simultaneously. All four sides of the drawer can be loaded into the machine for optimum production capacity.High-quality finish in both plywood and solid wood drawer box materialFast operation with up to 40 drawer boxes produced in an hourSolid cast iron machine structure for vibration-free dovetailing leading to a long machine lifeSuperior finish with two flute dovetail bitFEA...
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 3HP
COLECTOR DE POLVOS - 3HP - 2CK-UFO102BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.3HP generating 1883 CFMBase is mounted on casters so...
-500x500.png)
AMXmachinery1
LIJADORA CALIBRADORA - 1 HP
PARTE: 2MK-LD.300 - LIJADORA CALIBRADORA - 1 HPIs ideal for shaping and smoothing edges, squaring end-cuts and truing simple and compound miters. The precision ground cast iron table adjusts for bevel sanding up to 45-degrees and the 1 HP totally enclosed fan cooled direct drive motor spins at 1,700 RPM, which is ideal for wood sanding applications.Miter GaugeThis sander includes a deluxe miter gauge for moving workpieces into the sanding disc at a specific angle. To use the miter gauge simply s...