Identificador: 1674
Abierta
.jpg)
Descripción
PARTE: 2CK-FR-300 - SIERRA SE VAIVEN
FEED ROLLS & PRESSURE ROLLS
- Bottom Rolls – 7 pieces in Front Section & 5 pieces in Rear Section
- Top Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensor
- Top Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
|
Motor
|
20 HP +1/2 HP + 5kW(Servo) + 2HP Blower |
|
Max. Working Thickness
|
310 mm |
|
Min. Working Thickness
|
80 mm |
|
Max. Working Length
|
200 mm |
|
Min. Working Length
|
400 mm |
|
Feed Speed
|
0.1-2.0 m/min |
|
Main Shaft Speed
|
450 RPM, stroke distance 260 mm |
|
Saw blade Size
|
655 x 45 x 0.8 mm, Kerf: 1.2 mm, Pitch: 15 or 17, Stellite or TCT |
|
Max Saw Blades
|
30 pieces |
|
Finished Tolerance Value
|
±0.15 mm |
|
Min Precision Thickness
|
3 mm |
|
Dust Pipe
|
5“ x 4 pieces |
|
Machine Dimensions
|
L3200 x W1050 x H2050 mm |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ENLAZADORA DE CAJONES AUTOMATICA
ENLAZADORA DE CAJONES AUTOMATICA 2CK-JDT75Display your quality and are built to last, producing beautifully aesthetic dovetails for drawer box production from a wide range of wood types, including plywood and solid wood. This fully automatic machine produces both the pin and tail of the dovetail simultaneously. All four sides of the drawer can be loaded into the machine for optimum production capacity.High-quality finish in both plywood and solid wood drawer box mater...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA 10' X 10 GA
CORTADORA DE METAL HIDRAULICA 10' X 10 GA PARTE: 2GM-HS-1010MISO 9001 certifiedTaiwan machinesHS-1010M comes with 24” manual back gauge, one side handwheel operate )adjustment 0.004” , inch/mm digital displayQuick Change Blade Gap Adjustment (BGA), with gap dialShadow line for accurate straight cutting60” squaring arm with inlaid inch/metric dual scaleCE standard “OMERO” electric control systemMeet OSHA safety standard codeAdjustable cutting length and s...
AMXmachinery1
LIJADORA DE BANDA ANCHA - MESA FIJA - 1 A 4 BANDAS
PARTE: 2CK-SUIncorporates a fixed table along with upper moving sanding units. This makes it ideal for in-line sanding or for use with conveyors as they do not need to be adjusted when changing material thickness. The digital thickness control will program the sanding units in accurately and precisely each time. The SU series is available with 1-4 sanding units and in widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (...
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 3HP
COLECTOR DE POLVOS - 3HP - 2CK-UFO102BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.3HP generating 1883 CFMBase is mounted on casters so...