Identificador: 1145
Abierta
Descripción
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUM
When do you feel challenged as a company?
When a customer asks you to create something out of the ordinary.
In this case German trailer manufacturer Brüggen needed a solution to cut 14m long x 3m20 wide sandwich panels for box bodies. Most of them are used to build reefers to transport perishables. We accepted the challenge and delivered this custom built space saving solution. A 320 DSXE 14.300.
Looking for something similar, feel free to challenge us.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
PARTE: 1SL-DC-SC3HD - PLUMA HIDRAULICA - 3 TON - PLEGABLE
PARTE: 1SL-DC-SC3HD - PLUMA HIDRAULICA - 3 TON - PLEGABLE
AMXmachinery
EXTRACTOR AXIAL DE PARED - DE 6 ASPAS - 36” DIAMETRO - AMERICAN COOLAIR
PARTE: AMX-10090 - EXTRACTOR AXIAL DE PARED - DE 6
ASPAS - 36” DIAMETRO - AMERICAN COOLAIRUSADO - EXCELENTES CONDICIONES - COMO NUEVOPOLEA Y BANDAVENTILADOR
MOTOR CERRADO DE 1 HP, 220/440V, 3
FASES, 1,750 RPMMEDIDAS TOTALES: 16" ANCHO X 44" LARGO X 44" ALTO
AMXmachinery
PARTE: 2QM-R-RCGS - ENGOMADORAS 1 Y 2 LADOS - ANCHO 24", 48" Y 63"
PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 1 LADO – ANCHO 24” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 2 LADOS – ANCHO 24” -
1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-48-1.75 - ENGOMADORA - 1 LADO – ANCHO 48” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-48-1.75 - ENGOMADORA - 2 LADOS – ANCHO 48” -
1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-63-1.75 - ENGOMADORA - 1 LADO – ANCHO 63” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-63-1.75 - ENGOMADORA - 2...
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...