Identificador: 618
Abierta
Descripción
TRANSPORTADORES DE GRAVEDAD SOPORTES
PARTE: 1CE-0300 - PEDESTAL TIPO H DE ALTURA VARIABLE - DE 16" A 20"
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/D
PARTE: 2LI-ED-0 - MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/DNuevo con garantíaMeasuringRange6-45%DisplayBright LED display with 0.1% resolution below 10% and 1% steps above 10%. Lifetime warranty for the most durable display.SpeciesCorrections2 Wood groups for softwoods and hardwoods, wood-based panel productsCalibrationStable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. All mini-Li...
AMXmachinery
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO PARA MADERA, MDF, PLYWOOD, COMPOSITES, PAPEL, CARTON, ETC.NUEVO CON GARANTIA24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use s...
AMXmachinery
LIJADORA DE BANDA ANCHA – 36” ANCHO – 1 BANDA – TIMESAVERS
PARTE: 12219 – LIJADORA DE BANDA ANCHA
– 36” ANCHO – 1 BANDA – TIMESAVERS
USADA – BUENAS CONDICIONES
0
to 8" thickness capacity, (manually adjusted via handwheel)
20
HP, 230/60/3 combination 4" diam. drum & platen sanding head
(60
- 65) durometer rubber covered contact drum
1
HP, 230/60/3 feed conveyor motor
(15
to 45 ft/min.) variable conveyor feed via variable speed pulley
24"
infeed & 8" outfeed conveyor, (4 jack screws for raise & lower)
Automatic
...
AMXmachinery
CNC TALADRO, ENGOMA, INSERTA – WEEKE
PARTE: 12381 - CNC TALADRO, ENGOMA,
INSERTA – WEEKE
USADA – MUY BUENAS CONDICIONESYear
2013Model
Optimat ABD-050Year
2013460
volt three phase, 60 hz, 10 amps(1)
horizontal CNC controlled X-axis drilling head0.55
kw drill head drive motorSpindle
speed 7500 rpmMax
tool length 70 mm (2.75")(1)
glue injector with dowel insertion headTop
mounted vibrating dowel hopper feederPneumatic
actuation of drill head stroke and dowel insertion head(2)
independent table work zones (can be us...