Identificador: 2897
Abierta
.PNG)
Descripción
PARTE: 2RI-R152 - TALADRO LINEAL CNC - 152 HUSILLOS
Is a woodworking machine that can drill rows of evenly spaced holes in cabinet and furniture components. Drills two rows of shelf pin holes simultaneously. It has 152 spindles arranged in two rows of 76 each, and it can drill a full 8 foot panel with precision and speed. It is designed for closet panel production and features servo driven and programmable through boring, twin ball screw boring stroke control, and right and left hand work stations.
Standard Features
- (2) 76 Spindle Gear Driven Heads
- (6) 3 HP Spindle Drive Motors, TEFC
- 32mm Spindle Centers
- 10mm Bored Collets
- (76) Right Hand, (76) Left Hand
- CNC Table Feed Control
- Electronic Drill Head Squaring
- Foot Actuated Boring Cycle
- Minimum hole spacing: 5” (127mm)
- Magnetic Controls
- Tooling Not Included
Technical Data and Specifications:
- Drive Motors: 3 HP
- Spindle Centers: 32mm
- Collet Size: 10mm
- Throat Capacity: 24"
- First to Last Spindle: 2,400mm (94.488")
- Maximum Material Thickness: 1.25"
- Electrical: 230V, 3Ø, 60Hz, 60A or 460V, 3Ø, 60Hz, 30A
- Air: 2 CFM at 80 – 100 PSI
- Work height: 36″
- Footprint: 54″ x 136″
- Table Area: 30″ x 108″
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 5' X 12GA
DOBLADORA DE METAL 5' X 12GA PARTE: 2GM-0512EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is po...
-500x500.png)
AMXmachinery1
ARMADORA DE PUERTAS
PARTE: 2RI-R300V - ARMADORA DE PUERTASIs designed for high and low volume production requirements. Is the largest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assem...
-500x500.png)
AMXmachinery1
LIJADORA DE BANDA - 6"
PARTE: 2RI-R901 - LIJADORA DE BANDA - 6"Description:Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing applications makes this the industry’s most universal edge belt sander.Standard Features:Double Sided Ground Steel PlatenBias Tilting TablesFull Dust Hood with 4" End Openings for Dust CollectionPedestal BaseControls Accessible From Both SidesMagnetic ControlsEnd Sanding Kit with...
-500x500.jpg)
AMXmachinery1
ROUTER DE PEDESTAL
ROUTER DE PEDESTAL 2CK-DR750Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large s...