Identificador: 1013
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: AMX-10070 - TRANSPORTADOR DE BANDA INCLINADO – 205 CM LARGO
USADO – MUY BUENAS CONDICIONES
MEDIDAS MAQUINA: 54 CM ANCHO X 205 CM LARGO X 145 CM ALTO
MEDIDAS BANDA: 25 CM ANCHO X 404 CM LARGO
13 EMPUJADORES EN TODA LA BANDA
MOTOR ½ HP, 208-230/460V, 3 FASES, 60 HZ, DAYTON
CONECTADO A 230V, 3 FASES
Video: https://vimeo.com/478794190
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
BRIQUETEADORA 10 HP 25 HP
PARTE # 32GH-BP-1000B - BRIQUETEADORA - MOTOR 10 HPPARTE # 32GH-BP-2500B - BRIQUETEADORA - MOTOR 25 HPThe briquette presses are Strong, Robust and Compact.Delivered Fully assembled and ready for Immediate connection.Reliability and longevity associated with Hydraulic machine system.Produce high quality, evenly shaped briquettes in a unique closed end die system.Minimum friction is generated for low wear rates.P.L.C. (programmable logic controller) control hydraulic system which keeps all the hyd...
AMXmachinery
SIERRA DE BANCO PORTATIL
PARTE # 2MK-SC.650 - SIERRA DE BANCO PORTATIL CON LLANTAS – 1500W (2 HP), 110VNueva con garantíaMotor: 110 VMax. Cutting Depth: 90°: 80 mm (3,1″) – 45°: 55 mm (2,2″)Max. Saw Blade Diameter: 254 mm (10″)Table Dimensions: 825 (32,4″) x 500 (19,7″) mmTilting: 45°Extender Table: YesLaser Guide: YesDust Bag: YesPower: 1.500WSpeed: 5.000 RPMWeight : 34 kg (75 pounds)The Portable Table Saw SC.650.I MAKSIWA was designed to work with 254 mm blades (10”) and can cut wood and acrylic (s...
AMXmachinery
CEPILLO 2 CARAS - ANCHO 24” - CANTEK
PARTE:
12408 - CEPILLO 2 CARAS - ANCHO 24” - CANTEK
USADO - EN BUENAS
CONDICIONES
Top cutterhead motor 30 HP 460 volts Helical cutterhead
Bottom cutterhead motor 25 HP 460 volts straight knife
cutterhead
Feed motor 5 HP on spike carpet feed system 25 to 95 fpm
Digital control panel
Capacity 3/8” to 6-1/2” thickness
Max lumber width 24”
Min lumber length 15”
AMXmachinery
SIERRA VERTICAL ELCON ESPECIAL 1
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUMA vertical panel saw can be used to cut through various materials, like wood based,plastics, composites etc.This episode's custom built Elcon panel saw was developed to cut through aluminium tailgate / cargolift. A bar code scanner tells the machine to cut off the left and left and right side. The sawing speed is automatically adjusted to the thickness of the material, in this case up to 135mm!