Identificador: 31
Abierta
Descripción
PART # 4VF-SV45MN - TRISCADORA PARA SIERRA CINTAS 10 -45 MM
Nueva con garantia
Possibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree; self centring clamps. Workbench model.
Bandsaw Thickness [min-max]: 0,5 – 1,00 mm
Bandsaw Width [min-max]: 10 – 45 mm
Setting Pitch [min-max]: 5 – 25 mm
Two types of setting:
Net – Gross Weight: 3,8 – 4,5 kg
Machine Dimensions [D x W x H]: 35 x 20 x 20 cm
Packing Dimensions [D x W x H]: 20 x 30 x 20 cm
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LAMINADORA 62" RODILLOS SEGMENTADOS
PARTE # 2EV-0207 – PINCH ROLLER 62” - RODILLOS SEGMENTADOS – EVANS 020762" capacitySegmented bottom roller for countertop operationSafety Gates on In-Feed and Out-FeedSolid Top RollerSplit Bottom RollerFeed Rate: 50 FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 HzAir Requirement: 100 PSIShipping dimensions 85” long X 33” wide X 57” high*Note: Options Listed under 0257 Pinch RollerOptions:- ...
-500x500.jpg)
AMXmachinery
PARTE: 12445 - MOLDURADORA - 6 CABEZALES - WEINIG PROFIMAT 23
PARTE: 12445 - MOLDURADORA -
6 CABEZALES - WEINIG PROFIMAT 23
USADA - BUENAS CONDICIONES460/60/3 electrics(3) moving/positioning heads, (left vertical
& both top heads)EM-11 hydraulic feed hopper system, S/N:711-307Includes the dust-manifold
Falta cambiarle 1 pieza - cotización
Weinig USA - $ 1,171 USD
AMXmachinery
ASTILLADOR A GASOLINA – 13.5 HP – MAX DIAMETRO 4.5”
PARTE:
2EB-MDWC1500 - ASTILLADOR A GASOLINA – 13.5 HP – MAX DIAMETRO 4.5”
NUEVA CON GARANTIAElectric
Start (Battery included), Emergency Stop Lever for Safety,Powerful
13 1/2 HP B&S Gasoline Engine, 4-stroke, air-cooled,Efficient
Disc Rotor cutting up to 4 1/2 in. in diameter,360
degrees rotatable Discharge Chute, 2"
Ball Trailer Hitch,Self-feeding
gasoline engine powered that uses a large disc rotor. Compared to most others
which use a drum style processor, this machine is mo...
AMXmachinery
TALADRO UNION BASTIDORES - 1 TALADRO
PARTE # 2RT-R200T - TALADRO UNION BASTIDORES - 1 TALADRO1.5 HP Spindle Drive Motor, TEFCManual Controls, 1-Phase, 110 V, 60 HzFoot Actuated Boring Cycle14 Degree Single Spindle6,100 RPM Spindle SpeedBall Bearing Collet Guide Bushing Block24” x 30” Table AreaAdjustable Fence with (2) StopsTooling IncludedDesigned and Manufactured in the USAAdditional options for this machine include:R200T3 – 1.5 HP 3-Phase 230/460 VoltHis machine is part of the R200 assembly system that includes the R200E/A...